Dvico TVX-HD M-6600A Guide Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Software Dvico TVX-HD M-6600A Guide herunter. Dvico TVX-HD M-6600A Guide 8 Seiten. Tvx-hd upnp
Seite drucken3. How to set up Wireless network on TVX-HD
Connect the Wired network, and Upnp list will be displayed automatically.
1) Have your USB module attached to your TVX-HD If you PC is connected with wire/ wireless AP router.
2) Please refer to the TVX-HD homepage (www.TViX.co.kr/Eng) for a list of compatible wireless devices.
※ only one USB module is supported for the TVX-HD, 2 models are not supported at the same time.
3) After booting, press SETUP-NETWORK- "Wi-Fi IP setting" and select DHCP or static IP.
To set the Wi-Fi IP, refer to Setting Network Configurations in TVX-HD manual.
4) After selecting DHCP, press "Search Wi-Fi Network" for searching your AP or AP router.
5 After the interval of searching, you can see the following popup menu. Select the AP you want to connect
with.
6) A red colored icon means the AP uses WEP (Wired Equivalent Privacy) and a blue colored icon means a
non-WEP AP.
Currently supported WEP (Wired Equivalent Privacy) settings are the OPEN System and WPA(Wi-Fi
Protected Access).
WEP key input : WEP 64-Bit/ WEP 128 key and ASCII and HEX key.
WPA key input : ASCII only.
RADIUS (Remote Authentication Dial-In User Services) servers are not supported.
※ You have to configure the WEP setting of the AP using the AP's instruction in advance.
7 Insert the network key using the remote's numeric keys. As you press the MENU button, the input mode for
.
the remote will be cycle from lowercase alphabet to uppercase alphabet to numeric input mode.