Datavideo TLM-170P Gebrauchsanweisung - Seite 10
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Monitor Datavideo TLM-170P herunter. Datavideo TLM-170P 20 Seiten. 17.3” full hd lcd monitor
Auch für Datavideo TLM-170P: Gebrauchsanweisung (16 seiten)
Seite drucken
Function Button - pixel zoom feature
This feature is designed for use with HD-SDI and HDMI sources above 720p resolution. Press this button to
zoom in to the video on the display. This is strictly a zooming function and does not alter the native aspect
ratio of the source pixels to fill the screen.
The FUNCTION button allows you to toggle the Pixel Zoom feature between zoom x1, x2, x4 and x8.
When turned ON the zoomed display may be moved left or right using the VOL + /- ZOOM keys and up or
down using the up/down keys.
A Flashing FUNCTION button light will be activated whenever you are in a zoomed mode as a
reminder/warning that the entire incoming signal is not being shown on the monitor.
To exit zoomed mode, simply press down on the MENU key. To exit the Pixel Zoom feature entirely simply
press the MENU button once more.
Menus
The TLM-170P is set up using an OSD menu system. To display the OSD menu press the MENU button.
This menu system is navigated using the Up / Down buttons to change a value or to highlight a menu option.
Press the Enter button to select an option or to confirm a value.
MAIN MENU
You can choose:
MAIN ADJUST
COLOR ADJUST
SCAN SETTING
INFORMATION
PIP SETTING
LANGUAGE
SETUP MENU
SPECIAL FUNCTION I
SPECIAL FUNCTION II
SETUP NETWORK
SETUP F. W.
FACTORY RESET
AUDIO CONTROL
EXIT
MAIN ADJUST
You can choose:
BRIGHTNESS
CONTRAST
SHARPNESS
SATURATION
TINT
BACK LIGHT
3D COMB
NR
MPEG NR
DLC
VOLUME
EXIT
0~100
0~100
0~100
0~100
0~100
0~100
DISABLE / ENABLE
HIGHD / MID / LOW / OFF
HIGHD / LOW / OFF
DISABLE / ENABLE
0~100
3D COMB is for video noise suppression.
NR is for video Noise Reduction.
MPEG NR is for MPEG format Noise Reduction.
DLC is for Dynamic Luminance Control.
10