Datavideo TLM-434H Gebrauchsanweisung - Seite 8

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Monitor Datavideo TLM-434H herunter. Datavideo TLM-434H 12 Seiten. 4x 4.3” sd / hd monitor

Seite drucken

Menu Options

The TLM-434H is a menu driven unit; there are 4 menus for each panel. These menus are used to initially

set up the unit. The menu settings are non-volatile (settings are stored even when the unit is switched off).

So many of the settings will only need to be set once. The On Screen Display menu options are hidden if no

button is pressed within a certain time (see Setup menu, OSD Timer).

Picture

- Press the MENU button to enter the system Picture mode.

- Press ENTER button into the Picture setting position.

- Press UP / DOWN button moving to the Brightness setting.

- Press ENTER button to select the Brightness setting value.

- Press UP / DOWN button to change the Brightness value from 0~100

- Press MENU button to return to the Picture setting menu.

- Press SOURCE button exit the setting mode.

N.B. To select a different setting (Contrast, Saturation, Tint) use the UP / DOWN buttons.

Follow the same procedure to set these values as required.

Func.

- Press the MENU button three times into the Func. mode.

- Press ENTER button to select the Func. setting.

- Press UP / DOWN button moving to the Safety Zone setting.

- Press ENTER button to select Safety Zone value (80%, 90% or OFF).

- Press UP / DOWN button exit the setting mode.

N.B. To select a different function (4:3 Screen, Cinema Zone) use the UP / DOWN buttons.

Follow the same procedure to set these functions as required.

Setup

- Press the MENU button four times into the Setup mode.

- Press ENTER button into the Setup setting position.

- Press UP / DOWN button moving to the OSD Timer setting.

- Press ENTER button into the OSD Timer setting position.

- Press UP / DOWN button to select the OSD display on screen time (value from 5~60 SEC).

- Press ENTER button to setting the OSD display on screen time.

- Press UP / DOWN button moving to the OSD Blending setting.

- Press ENTER button into the OSD Blending setting position.

- Press UP / DOWN button to select the OSD blending display on screen (value from 0~7).

- Press ENTER button to setting the OSD blending display on screen

- Press UP / DOWN button moving to the Color Temp setting.

- Press ENTER button to select the required Color Temperature (9300, 7500, 6500, 5400, USER).