AUSTEM ESS 3kW Handbuch für Installation und Betrieb - Seite 16

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Betrieb für Stromversorgung AUSTEM ESS 3kW herunter. AUSTEM ESS 3kW 20 Seiten.

4.5 Basic operation and stop

◐ Operation

1. Check, there is no abnormality in the entire wiring.

Make sure that the polarity of PV array input and battery input is correct.

The system may be damaged at the time of incorrect connection.

If there is no abnormality, switch on the circuit breaker on PV input side and battery input side to enable

KEYPAD.

3. Set the parameter value as LCD and KEYPAD according to usage conditions.

Be sure to set the calendar clock.

The <GRID> LED lights up when the AC circuit breaker is turned on.

5. In Automatic mode, operation starts automatically after the set switching time. Press ENTER (SET) key to

start operation without waiting time.

In Manual mode, operate with the RUN button. It can be set in Select Set Auto / Manual. Operational

information can be checked through the LCD screen.

6. Normal / Schedule can be set in Operation Mode of Select Set menu,

Normal mode, the connected load will discharge through the battery or charge the battery through the

GRID or PV.

2) Schedule mode, the charging / discharging time set in Etc.set can be generated from the battery or PV

through the GRID, or the battery can be charged through the grid or PV power.

How to set the mode

◐

① Normal mode(Default setting)

Menu ► Select Set ► Operation Mode ► Normal

•

Grid-connected type : It is possible to charge the battery with PV and supply the power from grid to load.

• Stand-alone :

It can be powered by PV and battery. In the absence of PV power, the battery will discharge.

② Schedule Mode(Exclude standalone products)

Menu ► Select Set ► Operation Mode ► Schedule

Menu ► Select Set ► Grid Reverse ► On(Grid power generation function)

• Set

charging time and amount of charge

Battery and PV power supply during blackout.