ADE Megan Gebrauchsanweisung - Seite 8

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Skalen ADE Megan herunter. ADE Megan 8 Seiten.

Seite drucken

5. Weighing function (weight measurement only)

1. Switch on the scale by using the step-on-function. Just step on the centre of the

scale. Remain stationary on the weighing platform and do not hold you tight. After

a few seconds your weight will be displayed.

2. After weighing step off the scale. The scale will switch off automatically after a

few seconds.

6. Programming / Enter of personal data

Before first time use your personal data like gender (female or male, sports or no

sports), body height and age must be programmed and saved under selected

locations P1 – P8 (up to 8 persons). The enter keys are located at the right side apart

from the weighing platform. To enter your personal data please utilise the buttons:



SET (on and save button),

(minus button),

points:

1. Press the SET-button. The display indicates a

flashing "P1". To select your personal location

(P1 - P8), press  or  button. After the selection

of your personal location press the SET-button to

save the reading.

2. After you've selected your personal location

(e.g. P3) the symbol for gender starts to flash.

To select the requested gender ( male,

male sports,

female sports), press the

 or  button. After the selection of your gender

press the SET-button to save the reading.

3. After you've selected your gender the symbol for

body height starts to flash (default 165 cm). To

enter your height press the  or  button. After

the selection for your height press the SET-button

to save the reading.

4. After you've selected your body height the

symbol for age starts to flash (default age 30).

To enter your age press the  or  button.

After the selection of your age press the SET-

button to save the reading.

After input completion the scale automatically powers off after a few seconds.

To enter personal data of further persons please repeat the steps listed below.



(plus button) and follow the particular

165

age

P l

165

age

female,

P 3

165

age

P 3

165

age

P 3

7. Body Analysis

An analysis is only possible in bare feet. Your personal data must be entered first

(please see page 4 - 5).

1. Press the SET-button and select your personal location by using the  or 

button.

2. As soon as "0.0" appears on the display the scales is prepared for the

measurement.

3. Carefully step on the stainless steel flags of the scale in bare feet and remain

stationary while the measurement is now taking place.

4. At first your weight will be indicated on the display. Shortly after, while the

analysis is taking place, the signals "ooo" starts to move. After completion of the

measurement your measured values will be shown as follows:

EXAMPLE:

Weight

44.7

Body Water

The body fat content is shown as the amount of stored fat as a percentage of total body

weight. There is no generally accepted set value as this varies significantly according to

gender (due to the different build) and age. Body fat is vital for basic body functions. It's

protecting organs, cushioning joints, regulating body temperature, storing vitamins and

serves the body as energy storage. As essential for women a minimum body fat

proportion between 10% and 13% and for men between 10% and 13% is requested -

with the exception of competitive athletes.

68.5

21.9

7.9

Muscle Mass

Bone Mass

Body Fat

3.6