Austere VII Series Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Überspannungsschutz Austere VII Series herunter. Austere VII Series 5 Seiten.
Auch für Austere VII Series: Benutzerhandbuch (6 seiten)

Seite drucken

LED is not illuminated, your equipment is NOT protected from surge or irregular power

events. Powering your equipment with Austere Power in the absence of a Protected

LED voids the Austere Limited Lifetime Guarantee and Component Guarantee.

Connect Your Equipment:

Plug your equipment's power cords into the power strip's AC outlets. All Austere power products

feature expansive SmartFit outlets to accommodate your equipment's transformers without

covering neighboring outlets. It is important to remember that you should NOT plug extension

cords directly into the power strip. DO NOT OVERLOAD the surge protector's outlets. The surge

protector can accommodate a total equipment load of up to 15 amps (whether plugged into a

single outlet or spread out over multiple outlets).

If the load on the surge protector exceeds 15 amps, the internal circuit breaker will trip, and the

outlets will stop providing power. If the circuit breaker trips, reduce the load by unplugging some

devices. Reset the strip by cycling the power button from On to Off and then On again. Repeat the

process of unplugging a device to reduce the overall load until the strip remains On delivering

power to all connected devices.

If the ground indicator LED does not light when plugged in, move the power strip to a different

grounded 3-prong AC outlet. If this symptom continues, your outlets may not be properly

grounded and must be repaired by a professional electrician.

If the protected LED does not light, the power strip's AC line is no longer protected from surges,

and the power strip must be replaced. If the strip continues to be used with the protected LED in

the Off state, any connected equipment will not be protected from future surges and spikes.

USB Charging Ports: A total of (5) USB ports are available on both the V & VII Series power strip

models:

1. Two USB A ports on all models.

2. Three USB C ports on all models.

3. One of the USB C ports is a Power Delivery (PD) connection delivering 45W and up to 20v,

enough to charge and run high-power products such as certain laptops and large tablets. The

PD power port is a feature that is only available on the VII series models (7S-PS6-US1 and

7S-PS8-US1).