DVO ONYX SC Series Setup-Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Setup-Handbuch für Zubehör für Fahrräder DVO ONYX SC Series herunter. DVO ONYX SC Series 11 Seiten.
Seite drucken
ENGLISH
Step 1: SAG Setting
SAG is the amount the shock compresses under your own
body weight. Make sure you check your SAG with all your
riding gear on (riding shoes, hydration pack, etc). The ideal
amount of SAG is best determined by your bike manufacturer,
there are many linkage designs & each design works best
according their design.
The recommended SAG is 25% - 30%. Setting proper
SAG is the only way to find the right air pressure for
your shock. Refer to the chart below to find the proper
SAG.
Shock Size
SAG in MM
205x62.5
15.5-19 mm
185x52.5
13-16 mm
165x42.5
10.5-13 mm
12
For detailed instructions and videos, visit DVO Tech: tech.dvosuspension.com/setup
SAG RANGE
SAG in Percent
25-30%
25-30%
25-30%
Step 2: Air Pressure
Adjust the air pressure to attain your proper sag
setting by removing the air cap and inflating
the shock with a suspension pump. Refer to
the chart below for your recommended starting
pressure based on your rider weight.
Air pressure will vary greatly depending on the
bike you have. The table below is a starting point
to get you rolling. Once you set the pressure
based off the chart, immediately check SAG.
Recommended Starting Points for Air Pressure
TOPAZ
Rider Weight
lbs
kgs
150
160
100-130
45-59
Plush
Firm
130-150
59-68
Plush
Firm
150-170
68-77
Plush
170-190
77-86
190-210
86-95
210-230
95-104
230+
104+
Do not exceed maximum air pressure:
Topaz: 100-300PSI
Air Pressure (psi)
170
180
190
200
210
Firm
Plush
Firm
Plush
Firm
Plush
Firm
Plush
Suspension Set-Up Guide
ENGLISH
220
Firm
13