Agri-Fab 45-01764 Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Rasen- und Gartengeräte Agri-Fab 45-01764 herunter. Agri-Fab 45-01764 13 Seiten. 7 cu. ft. farm/yard cart
Seite drucken15. Lay the cart down on the floor so that the sides are up
in a normal position. Remove the front panel by sliding
it up, then remove the four large washers you used for
shims. See figure 9.
SIDE
PANEL
CART
SIDE
PANEL
FRONT
PANEL
FIGURE 9
16. Stand cart up on its front end again. Place tube caps on
leg tube and assemble the leg tube as shown in figure
10, using four M6 x 50 screws through side panels and
leg tube. Secure with flat washers and hex nuts. See
figure 10.
M6X50
SCREW
TUBE CAP
FIGURE 10
ENGLISH
(4) LARGE
FLAT
WASHERS
USED AS
SHIMS
LEG TUBE
M6 HEX
NUT
SIDE
PANEL
Ф6
FLAT
WASHER
17. Leave the cart standing to assemble the handle tube in
the next step.
18. Place tube caps on the handle tube, then place it over
the side panels and line up the four holes. Assemble
four M6 x 50 screws through the side panels and handle.
Secure with flat washers and hex nuts. See figure 11.
HANDLE
TUBE
M6X50
SCREW
Ф6
FLAT
WASHER
FIGURE 11
19. Lay the cart upside down. Slide the axle through the
axle clamps. See figure 12.
FIGURE 12
5
LEG
TUBE
M6
HEX
NUT
AXLE
CLAMPS
AXLE