Datecs INFINEAX-MINI Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Barcode-Leser Datecs INFINEAX-MINI herunter. Datecs INFINEAX-MINI 13 Seiten.

1 DATECS InfineaX-Mini

User manual

4. Operation Modes

To insert iPad mini in InfineaX-Mini, first remove all eight screws from top cover.

Then attach iPad mini to 9-pin lightning connector. After that, insert audio jack in iPad mini

connector.

4.1 Battery status level

(Press battery level button)

- Battery percentage above 75% – LEDs flash on green

- Battery percentage between 50-75% – LEDs blinks on green

- Battery percentage between 25-50% – LEDs blinks on orange

- Battery percentage between 10-25% – LEDs blinks on red

- Battery percentage under 10% – One red LED is blinks

(In operating mode)

- Low battery indicator - Battery percentage under 25% - one red LED is light all the time

- When the device is charging, green led is light

- Charging current of iOS device can be select between 500mA and 1000mA, when is

charging via USB adapter

4.3 Automatic charge

- When the battery level is above 25% – InfineaX-Mini is automatically start to charge iPad

Mini. When battery level is drop under 10%, charge automatically will stop.

- This function can be enabled or disabled

- Transferring data between iPad Mini and PC or MAC. This function can be enable or

disable.

- This function can be enabled or disabled (from setting or with right side button), switch

between rear and front speaker.

- When the rear speaker is active, blue led will light.

- This function is allow to transfer data with other device via Bluetooth.

- Holding on same time status and scan button for ~5sec