Datel TurboFire 2 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Videospiel-Controller Datel TurboFire 2 herunter. Datel TurboFire 2 6 Seiten. Wireless controller for xbox 360
Auch für Datel TurboFire 2: Benutzerhandbuch (5 seiten)

Seite drucken

6. Using the Turbo Rapid Fire Feature

The TurboFire 2 controller is equipped with a unique programmable Turbo Rapid Fire

feature that can boost your firepower in any Xbox 360 game. The Turbo Rapid Fire can be

set to operate at different speeds and can be assigned to wide range of buttons.

Step 1: Set Turbo Rapid Fire to 'on' or 'off'

Turbo Rapid Fire can be set to 'on' or 'off' by pressing 'Feature Button 2'. When set to on

the Feature Indicator Light on the left handle of the pad will illuminate. When pressing

the buttons which are assigned Turbo Rapid Fire the Feature Indicator Light on left handle

of the pad will flash at the speed of which Turbo Rapid Fire is operating.

Step 2: Choose Rapid Fire Buttons

By default, Turbo Rapid Fire is assigned to the right trigger button but different games will

use different buttons for actions like jump, shoot, block etc. In order for you to get the

most out of the Rapid Fire feature you can choose exactly which button or buttons it is

assigned to.

To program which buttons will use Rapid Fire, press and hold the 'Feature Button 2' and

then any one of the buttons shown in the following illustration. When you have made

your selection, release 'Feature Button 2'. When making your selection, the Feature

Indicator Light on the left handle of the pad will flash to indicate the speed at which Rapid

Fire is operating. Turbo Rapid Fire can be enabled on the following 8 buttons:

LT Button

LB Button

Press and

Hold Feature

Button 2

Press one or more of these buttons

RT Button

RB Button

Step 3: Set Turbo Rapid Fire Speed

Press and Hold Feature Button 2

Move the Right Analogue Stick Up and

Down to Set the Speed of Rapid Fire

After assigning Turbo Rapid Fire to one or more buttons (see previous section), you can

now set the speed at which Turbo Rapid Fire operates. To program the speed at which

Rapid Fire operates, press and hold the 'Feature Button 2' and move the right analogue

stick up to increase the speed and down to decrease the speed. Once you have set the

speed which you would like, release 'Feature Button 2'.

When increasing and decreasing the speed at which Rapid Fire operates the Feature

Indicator Light on the left handle of the pad will flash increasing in speed until remaining

solid to indicate maximum speed and decreasing in speed until flashing at a constant low

speed indicating the lowest speed.

Button