Datel TurboFire 2 Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Videospiel-Controller Datel TurboFire 2 herunter. Datel TurboFire 2 5 Seiten. Wireless controller for xbox 360
Auch für Datel TurboFire 2: Benutzerhandbuch (6 seiten)

Seite drucken

4. Controller Button Layout

The left and right analogue sticks can also be pressed as buttons.

5. Syncing the Controller

Before you can use the TurboFire 2 Wireless Controller for the first time you need to sync

it with your Xbox 360.

To do this, press the 'Home Button' on the front of the controller so that the player

indicator number lights begin to flash continuously. Next press and hold the 'Sync' button

on the rear of the controller so that the player number indicator lights whilst continuing

to flash alternate between the player numbers. To complete the syncing process, press

the 'Sync' button on the front of the machine.

After a few seconds the controller and console will be synchronised and a player number

will be assigned to the controller. The player number indicator lights will indicate the

assigned player number.

6. Using the Turbo Rapid Fire function

The TurboFire 2 controller is equipped with a unique programmable Turbo Rapid Fire

function that can boost your firepower in any Xbox 360 game. The Turbo Rapid Fire

function has 3 mode settings and can be assigned to wide range of buttons.

Each of the mode settings allow the Turbo Rapid Fire to run at its fastest speed but each

Start

mode includes a very slight timing difference which is required for some games.

Step 1: Choose Rapid Fire Buttons

By default, Turbo Rapid Fire is assigned to the right trigger button but different games will

use different buttons for actions like jump, shoot, block etc. In order for you to get the

most out of the Rapid Fire function you can choose exactly which button or buttons it is

assigned to.

To program which buttons will use Rapid Fire, press and hold the 'Turbo Button 2' and

then any one of the buttons shown in the illustration below. When you have made your

selection, release 'Turbo Button 2'.

Turbo Rapid Fire can be enabled on the following 8 buttons:

Press one or more of these buttons

LT Button

LB Button

Press and

Hold T urbo

Button 2

RT Button

RB Button

Button