ADE ZW60-45 Betriebshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Skalen ADE ZW60-45 herunter. ADE ZW60-45 20 Seiten. Electronic table scales

When the container is removed, a negative value is shown on the display. If the scale has

been tared before removing the container, this value will be the gross weight of the container

plus all products that have been removed. "ZERO" appears on the display.

6.3

Determining the weight

To determine the weight, first possibly tare the container as described above.

Then place the items to be weighed on the weighing surface. The display will show the

applied weight including the selected unit of weight.

6.4

The scale provides for weighing in percent. The reference quantity is given as 100%. Any

additional weight placed on the scale will be displayed as a percentage of the reference

quantity.

Place the reference weight on the weighing surface and press the % button as soon as

STABLE appears on the display.

The reference weight is now displayed as 100.00%.

Now place additional weight on the weighing surface or remove some items from it: the

display will show the applied weight in % of the reference weight.

Press the % button to return to the weighing mode.

6.5

6.5.1

First possibly tare the empty container as described above and leave it on the weighing

surface.

Press the SMPL button to start counting pieces.

Place a certain number of items to be weighed on the weighing surface. You must know the

exact number. Enter this number using the numeric keypad.

Press the SMPL button again.

If additional weight is now placed on the weighing surface, the display will show the quantity

corrected accord-ingly.

Press the MODE button to switch the display between the counted quantity, unit weight, total

weight and again the counted quantity.

Press the SMPL button to switch the scale back to weighing mode.

6.5.2

First tare the empty container as described above and leave it on the weighing surface.

You can enter a known reference weight using the numeric keypad by pressing the U.WT.

button.

Confirm the value by pressing the U.WT. button again.

Now place the weight to be counted on the weighing surface and the display will show the

number of applied pieces.

Press the MODE button to switch the display between the counted quantity, unit weight and

total weight.

Press the SMPL button to switch the scale back to weighing mode.

ZW60-210531-Rev006-UM-en