Datexel DAT 4532 C Allgemeine Beschreibung - Seite 4

Blättern Sie online oder laden Sie pdf Allgemeine Beschreibung für Medienkonverter Datexel DAT 4532 C herunter. Datexel DAT 4532 C 4 Seiten. Isolated, double channel converter for ptc/ntc/pot configurable by dip-switch or pc

Seite drucken
INSTALLATION INSTRUCTIONS
The device is suitable for fitting to DIN rails in the vertical position.
For optimum operation and long life follow these instructions:
When the devices are installed side by side it may be necessary to
separate them by at least 5 mm in the following cases:
- If panel temperature exceeds 45°C.
- Use of high power supply value ( > 27 Vdc ).
- Use of output current.
Make sure that sufficient air flow is provided for the device avoiding to
place raceways or other objects which could obstruct the ventilation slits.
Moreover it is suggested to avoid that devices are mounted above
appliances generating heat; their ideal place should be in the lower part
of the panel.
Install the device in a place without vibrations.
Moreover it is suggested to avoid routing conductors near power signal
cables (motors, induction ovens, inverters etc...) and to use shielded
cable for connecting signals.
ISOLATION STRUCTURE
INPUT A
CHANNEL B
INPUT B
Datexel reserves its rights to modify totally or in part the characteristics of its products without notice at any time
OUTPUT A
CHANNEL A
POWER SUPPLY
OUTPUT B
LED
COLOUR
PWR
GREEN
12.5
HOW TO ORDER
The device is provided as requested on the Customer's order.
Refer to the section "Programming" to determine the input and output ranges.
In case of the configuration is not specified, the parameters must be set by the user.
ORDER CODE EXAMPLE:
DAT 4532C / KTY84-130 / 0 ÷ 200 °C / 4 ÷ 20 mA
Input type
Input range
Output range
PTC
NTC
PTC
NTC
LIGHT SIGNALLING
DESCRIPTION
STATE
Device powered
ON
OFF
Device not powered
BLINKING
Wrong dip-switches setting
DIMENSIONS (mm)
112
CONNECTIONS
INPUT
POT
G
G
N
L
I
M
I
POT
H
H
P
F
E
O
E
POWER SUPPLY
Vdc
Q
+
-
R
.
OUTPUT
V
mA
+
+
Vout
V
mA
+
+
Vout
ED.03.08-R.06