Cooking Performance Group SOE100X Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Backofen Cooking Performance Group SOE100X herunter. Cooking Performance Group SOE100X 18 Seiten. Electronic steam oven

Seite drucken
DIFFERENT
COMPONENTS

The different components

Designation
Tank
Pump
Flow meter
Generator
Heating cover
6
Function
The tank must
•
Be filled up to maximum level with
water before every cooking session.
•
Be emptied after every cooking
session
If the tap water is very hard, use
bottled water.
Never use demineralised water.
A triac (TC1) switches on the pump
The pump transfers the water from the
tank to the generator.
The flow meter is incorporated into the
water circuit, between the outlet of the
water reserve and the pump.
The water displacement makes a blade
turn on wich there is a magnet that
releases a transistor function (effect of the
field).
The
impulses
are
counted
microprocessor
which
quantity of water going into the appliance.
A relay (REL1) switches on the generator.
The generator produces the heat to
change the water in steam.
The
appliance
is
protected
overheating by a safety thermostat KX1
(200°C) fitted under the generator.
A relay (REL2) switches on the heating
cover.
Throughout the whole cooking time, the
heating cover which is glued to the
external walls of the cavity keep the
temperature slightly higher 100°C to
prevent condensation. Its consists of two
elements in series of a total wattage of
390w
Characteristics
1 liter of water
The noise that can be heard if you
shake the tank when is empty comes
from the water level detector.
- 220/240V~
- 16W
When you reassemble the pump,
ensure there is no air bubble in the
circuit, and start the circuit up before
reassembling the panels
• Supply : 12V= between + and mass
• Out going voltage : between # and
Ø
5V= when it is not working
Ø
1,7V= when it is working
When you reassemble the flow meter
by
the
squeeze the pipes hermetically on it
controls
the
with the Rilsan ring, and ensure there
is no air bubble in the circuit, and start
the circuit up before reassembling the
panels
- 220/240V~
- 1600W
- 33Ω
from
- 220/240V~
- 390W
- 133Ω (88Ω and 45Ω )
Technical Training
symbol.
mass symbol.