COOKLINE CF-40E-240-1 Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fritteuse COOKLINE CF-40E-240-1 herunter. COOKLINE CF-40E-240-1 19 Seiten. Electric floor fryer

Seite drucken

Control panel, surface of the device and power cord should only be wiped off with a soft

cloth and a mild cleaning agent. You must not let water enter the switching unit. This may

lead to dangerous creeping current and malfunctions of the device.

Do not use any aggressive cleaning agents or abrasive materials as these could damage

the fryer. Clean the device with a mild cleaning liquid. Heavily stained parts should be left

for soaking.

All parts must be dried thoroughly. Reassemble the parts of device.

Store the device in a dry place when not using for longer periods. Keep it away from acid

steams and gases.

-30

6.3 Safety instructions for maintenance

Inspect the power cable regularly for damage. Never use the device if the cable is

damaged. If the power cable is damaged, have an authorized service center or qualified

electrician replace it.

In case of damage or malfunction, please contact our customer service centre.

Only a qualified technician and using original spare parts and accessories should carry out

repairs and maintenance of the device. Do not attempt to repair the device yourself.

7. Possible Malfunctions

Problem

Unit is connected to a

power source, green

The above mentioned trouble cases are just exemplary and to give you orientation.

Should these or similar troubles occur, please switch off the device and stop use

immediately. Contact qualified technicians or the manufacturer for inspection and

repair.

Problem

Unit is connected to a

power source, green

control light does not

come on, unit does not

heat up.

The orange heating

control light comes on,

the temperature does

not increase.

Cause

• Blown fuse

• Switching unit is improperly

installed

Cause

• Blown fuse

• Switching unit is improperly

installed

• Overheating protection has

turned off

• Damaged temperature

control (overheating security)

• Interrupted contact with

the heating element

• Damaged heating element

USRESTAURANT® RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE

Removal

• Remove plug and insert

properly

• Check fuses, connect

unit to another socket

Removal

• Remove plug and insert

properly

• Check fuses, connect

unit to another socket

• Check the location of the

switching unit

• Press RESET on the

switching unit

• Contact sales agent