Datexx EXACTIME DRC-608 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Uhr Datexx EXACTIME DRC-608 herunter. Datexx EXACTIME DRC-608 5 Seiten. Autoupdate radio controlled digital projection clock with thermometer

Seite drucken
INDICATOR
STANDING FOR
INDICATOR
RADIO SIGNAL
Z
Z
DATE
DATE
MONTH
TIME ZONES
PM
PM (12 HR DISPLAY ONLY)
AM (12 HR DISPLAY ONLY)
AM
ALARM 1
1
2

GETTING STARTED

* After installing batteries, set the time manually.
ONE TIME SET
ONLY
is needed
when first
used. The clock will update the time automatically
afterwards. Always place clock by the window for
better reception.
* If the radio signal is received, the date and time will
be set automatically and the icon [ ] will appear.
* The atomic clock receiver is programmed that it will continue to
search for the atomic time signal daily for every hour between
1:00 am and 4:30 am. Once the time signal has been successfully
received, the time and date will be updated automatically.
8
* Press MODE again : the month digits will flash and
month can be set by pressing
UP [ ] or DOWN [ ] key.
* Press MODE again : the date digits will flash and
date can be set by pressing
UP [ ] or DOWN [ ] key.
* Press MODE again : the hour digits will flash and
hour can be set by pressing
UP [ ] or DOWN [ ] key.
* Press MODE again : the minute digits will flash and
minute can be set by pressing
UP [ ] or DOWN [ ] key.
* Press MODE again : the temperature display between
Celsius or Fahrenheit will flash
and measurement unit can be set
by pressing UP [ ] or DOWN
[ ] key.
* Press MODE one last time : the normal time
display appears.
10
DISPLAYING TEMPERATURE AND ALARMS
STANDING FOR
* Press MODE to display the ALARM 1 time:
REPEAT ALARM INDICATION
MONTH
MOONPHASE
DEGREE CELSIUS
DEGREE FAHRENHEIT
* Press MODE again to display the Alarm 2 time:
ALARM 2
* Press MODE the third time to display the
PM
Temperature:
MONTH
DATE
SETTING TIME AND DATE MANUALLY
The time piece date and time can be set by pressing and holding the
PM
MODE buttons for 3 seconds in Time/Temperature display with the
MONTH
DATE
atomic time receiver disabled. To disable atomic time receiver, press and
hold MODE key until the atomic reception icon will appear from the display.
Setting the Time
* Press MODE
SETTING 12 OR 24 HOUR TIME FORMAT
[ ]
*Pressing
N.B.:1. If no key pressed within 30 seconds, the clock returns to the
MONTH
DATE
YEAR
Time / Temperature Display setting.
2. During any programming press and hold UP [+] or DOWN [–]
key for 2 seconds for faster scrolling through the digits.
MONTH
DATE
YEAR
Calendar
To change the weekday display from one language to another, press
and hold DOWN [–] key for 3 seconds - the display will show the
current language
MONTH
DATE
YEAR
Continue holding DOWN [ ] button until the desired day of the week
language abbreviation is selected. Release the DOWN [ ] button to
confirm the setting.
MONTH
DATE
YEAR
MONTH
DATE
MONTH
DATE
PM
MONTH
DATE
PM
MONTH
DATE
PM
MONTH
DATE
: the year digits will flash and year
can be set by pressing UP [ ] or
DOWN [ ] key.
MONTH
DATE
9
will display time in 12 or 24 hour format.
11
ALARM 1
ALARM 2
YEAR