Auston NUVI X7 Produkt-Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Produkt-Benutzerhandbuch für Körperpflegeprodukte Auston NUVI X7 herunter. Auston NUVI X7 19 Seiten. Smart sleeping mask

Seite drucken

Disclaimer

• The Nuvi is not a medical device and should not be used to

diagnose or treat any medical conditions. Consult your doctor

for the prevention, diagnosis and treatment of any medical

issues.

• Especially, if you have migraine, epilepsy, easy dizzy etc

symptoms that are sensitive to flashes light do not use before

consult your doctor.

• If you are wearing heart pacer and any medical instrument that

are easy interfered by other electronic devices, do not use

before consult your doctor.

Care Instructions

Regularly clean your mask especially after sweating or exposing

you skin to substances like soaps, lotions and make up that can get

trapped beneth the mask. To clean, gently wipe with soft cloth

moistened with warm water or mild detergents or oil - absorbing

tissuesand then remove all moisture with a soft, dry cloth. Do not

use harsh solvents or chemicals for cleaning.

Built-in battery precautions

Your Nuvi contains rechargeable lithium-ion battery, which is not user

replaceable. Tampering with your product, or attempting to open it, will

void the warranty and can result in a safety hazard.

Charge the battery using a computer, powered hub, or power supply that

is certified by a recognized testing laboratory.

Charge the battery in accordance with the instructions supplied with this

guide

Battery life and charging

With fully charged Nuvi in normal use about 2.5hrs/day should last for 5

days before needing a charge. The Nuvi will flashes red light indicate that

low battery and need charge before the next use.

To charge the Nuvi, plug the charging cable into the USB port on your

computer and plug the other end into the port in the Nuvi silicone pack.

You may also use any standard AC adapter with USB output as long as it

meets the following requirements:

Rated output voltage: 5V DC

Rated output current: minimum 0.5A

Class 2 certified device, conforming to Limited

Power Source requirements covered in IEC60950-1