Datum DTR30G Betriebsanleitung - Seite 12

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Laser-Wasserwaage Datum DTR30G herunter. Datum DTR30G 16 Seiten. Rotary laser dual grade

Seite drucken

USING REMOTE

Your instrument comes with an infrared remote allows you to operate the laser at a distance up
to 20m. The remote is used to control the same functions as on the laser control panel except
on/off, tilt alarm and wind mode.
To operate your laser with the remote:
•
Ensure the laser is turned on and self-levelled.
•
The LED indicator flashes when the remote is sending a signal to the instrument.
•
Follow the operation instructions in previous section.

OPERATION - LASER DETECTOR

Your detector uses 4 x AA 1.5V batteries. Locate battery compartment at the back of the
detector and insert batteries according to the symbols and polarity.
Mounting the staff clamp to the detector via the 1/4" thread on the back.
•
Switch the detector on by pressing the power button.
•
The LCD screen will display the battery level, accuracy setting and speaker mode.
•
Press button (L) to change between different accuracy settings.
•
Move the detector into the path of the laser beam.
•
Hold the detector upright for horizontal beam or rotate the detector 90° for vertical beam.
•
The direction arrows or level line on the LCD screen will indicate the position of the laser
beam. The detector will emit a constant beep once the level position has been located.
!
WARNING
12
If the product is used with accessories, for example masts, staves, poles, you
may increase the risk of being struck by lightning.
Do not operate the product in a thunderstorm.
ROTARY LASER LEVEL