Agri-Fab 45-03081 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Pinne Agri-Fab 45-03081 herunter. Agri-Fab 45-03081 20 Seiten. 5 hp universal tow behind tiller

Seite drucken

1. Service and Adjustment

TO REMOVE UNIT FROM

CARTON

• Cut from top to bottom all four corners of the carton

and lay panels flat. (See Fig. 1)

• Remove the lag screw that holds the floating hitch to

the packing skid.

• Disassemble and discard carton's wood top and side

supports.

• Remove four hex bolt, hex nuts and flat washer from

the hold down brackets at the rear of the carton.

• Remove and save the two Flat Washers and Cotter

Pins from the rear axle. Reuse when attaching gauge

wheels.

• Discard all other packing hardware and hold down

brackets.

• Right hand (RH) and left hand (LH) are determined

from the drivers position while seated on the tractor.

• We recommend that you remove the Mower Deck

before using the Tiller. Refer to your Tractor Owner's

Manual.

FIG. 1

ASSEMBLY

TO INSTALL THE TILLER

GAUGE WHEELS

• Assemble Gauge Wheels onto the Rear Axle with the

extended end of Hub facing inward. Secure with the

Flat Washers and Cotter Pins which you removed from

the axle during unpacking. (See fig. 2.)

TO INSTALL THE TILLER

TINE

ASSEMBLIES

• Attach the floating hitch to the tractor's draw bar.

(Refer to Operating Instructions on page 7.)

• Remove the preassembled 3/8" x 2" hex bolt and 3/8"

hex lock nut from the L.H. Tine Assembly. Slide the tine

assembly onto the Transmission Axle on the left side

FIG. 2

FIG. 3