brennenstuhl 1173143600 Betriebsanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Spotlight brennenstuhl 1173143600 herunter. brennenstuhl 1173143600 2 Seiten. Multi battery led hybrid spotlight

Seite drucken
Operating instructions
Compatible battery types:
Bosch Professional batteries 18 V/2-12 Ah
Dewalt, Makita, Metabo (CAS), Milwaukee (18 V rechargeable batteries)
Nominal voltage:
100-240 V~ 50/60 Hz
Power consumption:
60 W
Max. current:
0.8 A
Power factor:
> 0.9
Max. projected area:
684 cm
Dimensions:
25.6x16x27.5 cm
Dimensions of protective cover:
6.8x10 cm
Weight:
3.25 kg
This product is suitable for indoor and outdoor lighting purposes.
COMMISSIONING
Place the floodlight on a dry and level surface.
The adjustable bracket can be used to set various inclinations for the floodlight.
INSERTING AND REMOVING THE BATTERY
The floodlight is intended for operation with the subsequently listed batteries:
brennenstuhl® professionalLINE battery AB 1805
Bosch battery GBA 18 V x.x Ah Professional
Bosch ProCORE 18 V (up to a max. of 12 Ah) Professional
Dewalt 18 Volt rechargeable batteries
Makita 18 Volt rechargeable batteries
Metabo (CAS) 18 Volt rechargeable batteries
Milwaukee 18 Volt rechargeable batteries
The adapter can be inserted easily and quickly. To do so, open the lock (Fig. 1a) and fold the battery cover to the side
(Fig. 1a). Now insert the suitable adapter (Fig. 1c) into the Brennenstuhl interface (Fig. 1b) and lock it using the red locking
mechanism (Fig. 1d). Insert the charged 18 Volt rechargeable battery into the battery holder from the side (Fig. 1e) until it
noticeably engages in the end position. To remove the rechargeable battery, press the battery unlocking button and pull
the rechargeable battery out of the battery holder to the side. Afterwards, close the cover again (Fig. 1f).
To ensure IP65 (dust-protected and protected against splashing water), the floodlight may only be operated with correctly
closed battery cover.
If the device is not used for a longer period of time, remove the rechargeable battery.
1a
1b
MULTI 6053 MH
2
1c
Operating instructions
1d
1e
The floodlight can also be operated without battery cover up to 12 Ah rechargeable batteries; in this case, the IP class will,
however, be reduced to IP20 and the floodlight may only be operated in a dry environment. To do so, open the battery
cover locking (Fig. 1f). Afterwards, remove the battery cover.
OPERATION OF THE HYBRID MAINS FLOODLIGHT WITH RECHARGEABLE BATTERY
To switch the floodlight on, press the button at the back (Fig. 2).
Press the switch multiple times (Fig. 2) to set the brightness to 100%, then 75%, 50%, then 25% and then "off".
The lower the brightness selected, the longer the floodlight will burn.
If the switch is left in any of its "on" positions for longer than 5 seconds, then pressing it once again will always turn it off.
If the rechargeable battery is almost flat and the connection cable is not connected, the LED floodlight will flash 5 times.
Afterwards, the floodlight remains on for approx.
10 minutes with 50% brightness before it is switched off by the deep discharge protection function.
If the connection cable is connected while the floodlight is switched on (Fig. 3), the floodlight will flash 3 times and then
automatically switch into mains operation with 100% light.
2
3
100% 75% 50% 25%
OPERATION OF THE HYBRID FLOODLIGHT WITH POWER SUPPLY
The floodlight can be connected to the power supply using the supplied plug-in cable via the connection socket at the back side
(Fig. 3).
To switch the floodlight on, operate the button on the back (Fig. 2).
Press the switch multiple times (Fig. 2) to set the brightness to 100%, then 75%, 50%, then 25% and then "off".
If the switch is left in any of its "on" positions for longer than 5 seconds, then pressing it once again will always turn it off.
MULTI 6053 MH
1f