4SeasonSpa Augusta 20 Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Whirlpool 4SeasonSpa Augusta 20 herunter. 4SeasonSpa Augusta 20 12 Seiten. Easymini control box
Seite drucken1 Spa Operation
1 Spa operation
1.1
Hydro-massage Pump
This Spa has 1 pump (two speed) enabling you to select the preferred intensity of hydro-massage. This pump is connected and operated through
the display (Fig.1).
• Press on the buttons
to activate the pump at low speed.
• Press the same button a second time to turn to high speed.
• Pressing the same button a third time turns the Pump off.
A built-in timer automatically turns off the Pump after 20 minutes.
For spa's without circulation pumps only: if the pump is running automatically at low speed or remains running on low speed then the heating and/or filtration
cycle is operating and the pump will continue until the water has reached the desired temperature and/or the filter cycle is finished.
1.2
Lighting
• Press the
to turn light on.
• Press a second time (within 4 seconds) to switch to a different color.
• Press a third time (within 4 seconds) to continue changing the color or alter the lighting sequence.
A built-in timer automatically turns off the light after 2 hours.
1.3
Blower (where fitted)
When your spa has a blower you can start it the following way:
• Press the
to turn blower on.
• Press a second time to stop the blower.
A built-in timer automatically turns off the Blower after 20 minutes.
4