AUSTRAMAC FLASHCUT 1400 RM Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Säge AUSTRAMAC FLASHCUT 1400 RM herunter. AUSTRAMAC FLASHCUT 1400 RM 14 Seiten. Diamond rock saw

Seite drucken

4. Operator to ensure that they have the excavator key with them when

completing inspections to avoid unexpected start up.

MAINTENANCE AND SERVICING

The rock saw is a precision instrument and must be handled with care. The

blade and other components are designed for high-speed low torque cutting

and do not require excessive force to perform their operations. Operators

should always take care with the machine and only use it for the processes it

is designed to perform. If the rock saw is maintained and used correctly the

rock saw will have a long life and will perform exceptionally well. It is also

important that the excavator is maintained as this will impact on the rock saw.

The excavator oil should be free from contamination, the pickup should

be tight and the bushes in the excavator arm should not be worn.

The following maintenance and servicing are recommended:

1. Equipment to be inspected before and after every use as outlined in the

pre start checklist.

2. The rock saw must be serviced by qualified persons (Approved by

AUSTRAMAC) every 500 hours of operation or as necessary.

3. Rock saw motor lubrication to be changed every 500 hours or as

necessary.

4. Blade to be serviced if more than two segments in a row are missing,

more than a total of 4 segments missing, if the metal is less than 5 mm

thick or if segments are worn out (less than 3mm).

5. Blade to be serviced if it has lost tension.

6. Blade replacement and repair should be undertaken by approved

AUSTRAMAC technicians.

7. Never apply anti cease or lubrication to bolts.

8. If replacing blade, ensure blade bolts are tightened to

bolts to140Nm

120Nm and flange