4smarts SMART-BONSAI-QI Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Batterieladegerät 4smarts SMART-BONSAI-QI herunter. 4smarts SMART-BONSAI-QI 6 Seiten.

Seite drucken

V. Operation

Connect the included power supply to the corresponding connector

(5) and a suitable power source.

Qi Charging:

- Place the smartphone on the designated area (2)

- The LED indicator (5) signalises the successful charging process

by changing its colour.

Connecting devices (B7 version):

- Keep the control (8) pressed until the LED indicator (6) starts

blinking and the product switches to pairing mode.

- Go to the Bluetooth settings of your smartphone and search for

following device: 4smarts B7

- As soon as a connection has been successfully established, the

product will play a confirmation sound.

- If the product is not in use for a longer period of time, the LED

indicator (6) will turn off.

VI. Function notes

Lamp control (standard version):

Keep the control (3) pressed for 3 seconds to switch the light on

or off.

Touch the control (3) shortly to switch between the three bright-

ness levels.

Lamp control (B7 version):

Touch the control (3) shortly to switch the light on or off.

Click on the control (3) for 3 seconds to activate the sleep mode.

Time until automatic switch off after activation: 30 seconds

Slide your finger across the control (3) to dim or brighten the light.

Volume switch (B7 version):

Shortly press + or - on the volume switch (7) to regulate the sound

volume.

Next/Previous (B7 version):

Keep + or - pressed on the volume switch (7) to jump from one

song to another.

VII. Troubleshooting

The device doesn´t charge properly:

Make sure that the maximum charging distance that is stated in the

technical specifications is not exceeded. If necessary, remove ca-

ses or other objects from the smartphone that might be too thick.

Setting up the connection doesn't work (B7 version):

Make sure that the product:

- is fully charged.

- is inside the working range of the device.

- is not already connected to any other device (deactivate Bluetooth

at surrounding, other devices).

Make sure that your terminal device

- is compatible to the Bluetooth version, listed in the technical data

in this manual.

- has an active Bluetooth connection, and is in pairing mode.

- does not have other, active connections running.

Try to connect the product to a different terminal device.

VIII. Warranty

The 4smarts GmbH assumes no liability and provides no warranty

for damage resulting from improper installation/mounting, im-

proper use of the product or from failure to observe the operating

instructions and/or safety notes.

IX. Disposal notification

Electric and electronic devices as well as batteries must

not be disposed of with household waste. Consumers are

obliged by law to return electric and electronic devices

as well as batteries at the end of their service lives to the

public collecting points set up for this purpose or point of sale.

X. Service & Support

If the product is defective or in case of problems during installati-

on, please consult your dealer or the 4smarts product consulting

via http://www.4smarts.com/contact.

XI. Attestation of conformity

Hereby, 4smarts GmbH, declares that this device is in compliance

with the essential requirements and other relevant provisions

of Directive 2014/53/EU. The declaration of conformity may be

consulted at www.4smarts.com