Austro Flamm 65x Gebrauchsanweisung - Seite 10
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Innenkamin Austro Flamm 65x herunter. Austro Flamm 65x 17 Seiten. Inserts
Auch für Austro Flamm 65x: Benutzerhandbuch (10 seiten)
Seite drucken
4. Operating elements
The Austroflamm inserts stand out because of their simple operation.
convection air outlet
combustion/convection air inlet
operation of the combustion
air control
door lock
5. Operating symbols/operation
operation lever for combustion air
+ = maximum air supply for fast burning
I = average heat output
– = small heat output.
•
hinged door mechanism
– press handle outwards: door unlatches – pull open.
Door can be swung open.
„release":
Release the door handle in an open position (angle > 20° ), door closes and locks automatically and the
insert is ready to be used.
•
sliding door mechanism
–
lift = door open
–
pull down = door closed
• deflection damper heat exchanger
– turn to the right: flue gases will be conducted into the heat
exchanger. This may be executed only if the insert door is closed.
– turn to the left: flue gases will be conducted directly into the chimney. The insert door may be opened
only in this position
• throttle valve
– turn to the left: flap closes.
– turn to the right: flap opens. Flue gases exit through the chimney. The insert door
may be opened now.
6. Fuel wood
allowed fuel
dry, well-seasoned and natural wood (preferably hard wood) or wood briquettes.
clean combustion
the fuel wood must be dry (wood moisture < 15 %) and untreated. Moreover it is very important to use the
correct quantity of wood, in order to reach a clean and low-emission combustion. Apart from a low caloric value,
moist wood also makes your insert's glass panes soot faster than necessary. A sooting after 2-3 times of use is
normal. If you use fuel for heating which is not allowed, all guarantee or warranty claims ends
immediately!