Bender ATICS-BP-3-63A-SET Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Schalter Bender ATICS-BP-3-63A-SET herunter. Bender ATICS-BP-3-63A-SET 8 Seiten. Bypass switch set for atics

Seite drucken

Anschlussklemmen

Nur Kupferleiter verwenden.................................................................................................. ≥75 °C

Leiterquerschnitt starr min. / max. ...........................................................2,5 mm² ... 1 x 35 mm²

....................................................................................................................2,5 mm² ... 2 x 25 mm²

Abisolierlänge........................................................................................................................ 12 mm

Anzugsmoment (Kreuzschlitzschraubendreher PZ2 oder Schlitzschraubendreher 6,5 x 1,2 mm)

............................................................................................................................................... 4,5 Nm

Allgemeine Daten

Schockfestigkeit IEC 60068-2-27 (Gerät in Betrieb) .................................................. 15 g / 11 ms

Dauerschocken IEC 60068-2-29 (Transport)............................................................... 40 g / 6 ms

Schwingungsbeanspruchung IEC 60068-2-6 (Gerät in Betrieb)....................... 1 g / 10...150 Hz

Schwingungsbeanspruchung IEC 60068-2-6 (Transport)................................. 2 g / 10...150 Hz

Umgebungstemperatur (Gerät in Betrieb) .......................................................... -25 °C...+40 °C

Umgebungstemperatur (bei Lagerung) .............................................................. -40 °C...+70 °C

Klimaklasse nach DIN IEC 60721-3-3 ........................................................................................ 3K5

Betriebsart..................................................................................................................... Dauerbetrieb

Einbaulage ............................................................................................................................ beliebig

Schraubbefestigung................................................................................................................ 4 x M5

Schnellbefestigung auf Hutprofilschiene.............................................. DIN EN 60715 / IEC 60715

Gewicht ............................................................................................................................ ca. 1200 g

Schutzart, Einbauten (DIN EN 60529) ....................................................................................... IP30

Schutzart, Klemmen (DIN EN 60529) ........................................................................................ IP20

Entflammbarkeitsklasse .................................................................................................... UL94 V-2

Technische Daten Hilfskontakt für ATICS-BP-3-...

Schaltglieder....................................................................................................1 Öffner / 1 Schließer

............................................................................................................10 A (AC-13) / 6 A (AC-15)

............................................................................................................................................... 230 V

Schraubklemmen .................................................................................................................1,5 mm²

Technische Daten Hilfskontakt für ATICS®

Schaltglieder............................................................................................................... 3 Wechsler ÖS

Kontaktbemessungsspannung.............................................................................................250 VAC

Kontaktbemessungsstrom ........................................................................................... 5 A maximal

Gewicht.................................................................................................................................0,037 kg

Technische Daten Leuchtmelder grün/rot

LED-Spannungsbereich.......................................................... 12-48 VAC/DC (Toleranz +/- 10 %)

Frequenz ..............................................................................................................................50/60 Hz

Isolationsspannung .................................................................................................................. 250 V

Einbautiefe..............................................................................................................................68 mm

Einbaubreite................................................................................ 0.5 oder 1 Modul (9 oder 18 mm)

Gehäusefarbe.............................................................................................................grau, RAL 7035

Klimafestigkeit nach ....................................................................... IEC 60068-2-2 (trockene Hitze)

......................................................................................................... IEC 60068-2-30 (feuchte Hitze)

.........................................................................................................................IEC 60068-2-1 (Kälte)

Umgebungstemperatur.........................................................................................-25 °C bis +55 °C

Lagertemperatur....................................................................................................-40 °C bis +70 °C

Anschlussquerschnitt (Cu) ...................................von 1 x 1 mm

.......................................................................................von 1 x 0,75 mm

................................................................................................... mit Aderhülse oder Stiftkabelschuh

Anziehdrehmoment ...................................................................................................... 1,2 - 1,5 Nm

Normen .................................................................................................................... DIN EN 62094-1

Zulassungen................................................................................................................................. VDE

Verlustleistung.......................................................................................................................... 0.8 W

LED-Farbe.............................................................................................................................Grün, Rot

Gewicht...................................................................................................................................0.04 kg

Normen

Der Bypass-Schalter ATICS-BP-3-... entspricht den Vorschriften

DIN EN 60947-3; VDE 0660-107 und IEC 60947-3

ATICS-BP-3-SET_D00161_00_M_DEEN/06.2014

bis 1 x 6 mm

oder 2 x 2,5 mm

bis 2 x 1,5 mm

flexibel

ATICS-BP-3-63A-SET, ATICS-BP-3-80A-SET

Terminals

Only use copper conductors.................................................................................................. ≥75 °C

Wire cross section, rigid min. / max. ........................................................ 2.5 mm² ... 1 x 35 mm²

................................................................................................................... 2.5 mm² ... 2 x 25 mm²

Stripping length...................................................................................................................... 12 mm

Tightening torque (PZ2 Allen screw or slotted screwdriver 6.5 x 1.2 mm)

............................................................................................................................................... 4.5 Nm

General data

Shock resistance IEC 60068-2-27 (device in operation)............................................. 15 g / 11 ms

Bumping IEC 60068-2-29 (Transport) .......................................................................... 40 g / 6 ms

Vibration resistance IEC 60068-2-6 (during operation) .....................................1 g / 10...150 Hz

Vibration resistance IEC 60068-2-6 (during transport).................................... 2 g / 10 ... 150 Hz

Ambient temperature (device in operation) ....................................................... -25 °C...+40 °C

Ambient temperature (for storage)..................................................................... -40 °C...+70 °C

Climatic class acc. to DIN IEC 60721-3-3 ....................................................................................3K5

Operating mode .............................................................................................. continuous operation

Position .......................................................................................................................... any position

Screw mounting......................................................................................................................4 x M5

DIN rail mounting acc. to DIN EN 60715 / IEC 60715

Weight ....................................................................................................................... approx. 1200 g

Degree of protection, internal components (DIN EN 60529).....................................................IP30

Degree of protection, terminals (DIN EN 60529) .......................................................................IP20

Flammability class...............................................................................................................UL94 V-2

Technical data auxiliary contact for ATICS-BP-3-...

Switching elements............................................................................1 N/C contact / 1 N/O contact

............................................................................................................10 A (AC-13) / 6 A (AC-15)

...............................................................................................................................................230 V

Screw-type terminals...........................................................................................................1.5 mm²

Technical data auxiliary contact for ATICS®

Switching elements .................................................................................3 changeover contacts ÖS

Rated contact voltage.......................................................................................................... AC 250 V

Rated contact current .......................................................................................................... max. 5 A

Weight ..................................................................................................................................0.037 kg

Technical data indicator light green/red

LED voltage range ................................................................. AC/DC 12-48 V (tolerance +/-10 %)

Frequency ............................................................................................................................50/60 Hz

Insulation voltage......................................................................................................................250 V

Installation depth ................................................................................................................... 68 mm

Mounting width ................................................................................0.5 or 1 module (9 or 18 mm)

Enclosure colour ........................................................................................................ grey, RAL 7035

Resistance to climatic conditions acc. to ..................................................IEC 60068-2-2 (dry heat)

............................................................................................................ IEC 60068-2-30 (damp heat)

......................................................................................................................... IEC 60068-2-1 (cold)

Ambient temperature ............................................................................................ -25 °C to +55 °C

Storage temperature .............................................................................................. -40 °C to +70 °C

Wire cross section (Cu).............................................from 1 x 1 mm

......................................................................................from 1 x 0.75 mm

............................................................................................with connection sleeve or pin cable lug

Tightening torque.......................................................................................................... 1.2 - 1.5 Nm

Standards..................................................................................................................DIN EN 62094-1

Certification...................................................................................................................................VDE

Power dissipation ..................................................................................................................... 0.8 W

LED colour ......................................................................................................................... green, red

Weight ....................................................................................................................................0.04 kg

Standards

The ATICS-BP-3-... bypass switch corresponds to the require-

ments of the standards DIN EN 60947-3; VDE 0660-107 and IEC

60947-3

to 1 x 6 mm

or 2 x 2.5 mm

to 2 x 1.5 mm

flexible