Bendix/King Skymap IIIC Kurzreferenz - Seite 5

Blättern Sie online oder laden Sie pdf Kurzreferenz für Sende- und Empfangsgerät Bendix/King Skymap IIIC herunter. Bendix/King Skymap IIIC 6 Seiten. Global positioning system
Auch für Bendix/King Skymap IIIC: Handbuch (6 seiten), Handbuch für Piloten (14 seiten)

Seite drucken
Bendix/King Skymap IIIC Kurzreferenz
To create a Flight Plan:
1. Select the active Flight Plan (FPL 0) or one of the stored Flight Plans
(FPL 1 through FPL 9) on the screen.
2. Delete existing waypoints from the Flight Plan as necessary by placing
B
the cursor (
F
.
3. If you wish to insert a waypoint identifier between two other waypoints,
place the cursor (
to precede.
4. With the cursor on, enter the desired waypoint identifier and press
5. The waypoint page for the selected identifier will be displayed. If this is
the waypoint you intended to enter, press
6. Repeat the waypoint entry process as needed for your Flight Plan.
To use a stored Flight Plan:
1. Select the desired Flight Plan page (FPL 1 through FPL 9)
B
2. Press the
3. If you wish to use the Flight Plan in the order displayed, press
you wish to reverse the Flight Plan and use it, rotate the right outer knob
one stop clockwise, putting the cursor over Use? Inverted? and press
F
. The FPL 0 page will be displayed with your selected Flight Plan.
To create a user-defined waypoint at your present position:
1. Go to a Supplemental page (SUP 1, 2, or 3) and turn on the cursor
B
(
).
2. Spell out the name of your new user-defined waypoint on the top line,
using the right outer and right inner knobs.
3. Move the cursor to the bottom line of the screen, over Present Pos? and
F
press
.
To calculate the winds aloft:
1. Use the CAL 3 page to calculate the present pressure altitude.
2. Use the CAL 5 page to calcu-
late the present true airspeed
(TAS).
3. Turn to the CAL 6 page and
enter the present aircraft head-
ing. The headwind or tailwind
component of the wind, and the
wind vector (direction and
speed) will be displayed on the
last two lines of the CAL 6 page (figure 10).
) over the identifier, pressing
B
) over the waypoint you wish for the new waypoint
button to turn on the cursor over Use?.
E
, and then pressing
F
again.
17.6nm TAS:
SGJ
Hdg:
>Leg Headwind 002kt
CRSR
110°True
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
Figure 10
-5-
F
.
F
. If
136kt
025°
20kt