Dylos DC1100 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte Dylos DC1100 herunter. Dylos DC1100 20 Seiten. Air quality monitor

Operating Modes

The DC1100 has several operating modes. The user can cycle

through the various modes by pressing the MODE button.

Selections within a mode, such as viewing history data, are made

by pressing the SELECT button. In the various modes the

DC1100 will display both the small particle concentration and

large particle concentration. Small particle concentration is

always displayed to the left and large particle concentration to the

right. Small particles are all particles detected by the DC1100

down to its detection limit – approximately 1 micron. Large

particles are all particles detected above the large particle

threshold which is typically around 5 microns. The values are

scaled so that these represent the concentration of particles in

approximately .01 cubic foot of sampled air. Example of particles

that might be present in the typical home in these ranges are:

small particles: fine dust, bacteria, mold, smoke, smog, etc.

large particles: coarse dust, pollens, larger bacteria, plant

spores, dust mite feces, etc.

The DC1100 is simple to operate. All that needs to be done is to

plug the unit in and turn it on. Once turned on the unit will

automatically configure itself to run in continuous mode and

display the current level of particulate pollution for both small and

large particles. The data sampled will also be recorded for future

analysis. In addition, a dynamic bar graph will be displayed which

will give the user an immediate visual indicator of the number and

size of particles being detected.