Dymec DY-HI8011-90bt Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Laborausrüstung Dymec DY-HI8011-90bt herunter. Dymec DY-HI8011-90bt 7 Seiten. Hardened industrial 802.3bt gigabit poe injector, 1 x 10/100/1000m tx 90w pse + 1 x 10/100/1000m tx, 52-56 vdc input, operating temp.: -40c to +75c
Seite druckenDYMEC
Specifications
IEEE Standard
Network Connector
Network Cable
Protocol
LED
POE Pin Assignment
Reverse polarity protection
Overload current protection
Power Supply
Power Consumption
POE power
Removable Terminal Block
Operating Temperature
Operating Humidity
Storage Temperature
MTBF (mean time between failure)
Housing
Case Dimension (L X W X D) mm
Installation
Certifications
Safety
EMC
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3af for POE
IEEE 802.3at for POE+
IEEE 802.3bt
Compliant with 60W uPoE standard
Compliant with 95W Power over HDBaseT (PoH)
standard
1xRJ-45 10M/100M/1000MBaseT(X) Data
1xRJ-45 10M/100M/1000MBaseT(X) Data with 90W POE
Output Power
UTP/STP above Cat.5e Cable
EIA/TIA-568 10-ohm (100m)
CSMA/CD
PW1 (Green): ON－Power is detected
PW2 (Green): ON－Power is detected
PoE (Amber): ON – 90W PSE is in active mode.
OFF – PSE is in idle mode.
Pin 1 (V-), 2 (V-), 3 (V+), 6 (V+)
Pin 4 (V+), 5 (V+), 7 (V-), 8 (V-)
Present
Present
Redundant Dual DC 52V-56V Power Input
1 W@52 VDC Without POE
Maximum POE power 90watts at 52VDC input
Provides 4 pin terminal block
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG):12-24/14-22
Stranded wire(AWG): 12-24/14-22
Torque:5lb-In/0.5Nm/0.56Nm
Wire Strip length: 7-8mm
-40°C to 75°C
5% to 95% (Non-condensing)
-40°C to 85°C
716,686 hrs (Telcordia (Bellcore), GB) at 40°C
Rugged Aluminum, IP30 Protection
103.5 x 32 x 81.5 mm (L x W x D)
DIN Rail Mount or Wall Mount
LVD(EN60950-1)
CE, FCC, EN 55032/24
5