509 Fabrication 5095-1 Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Herd 509 Fabrication 5095-1 herunter. 509 Fabrication 5095-1 13 Seiten. Steelhead camp stove

FLUE SYSTEM

This Mini Wood Stove is designed for use with a 6" Flue System either in single wall (Minimum

28 ga. Metal or Stainless Steel for 18" Clearance to combustibles) or Double Wall Chimney pipe

or Class "A" 6" Pipe for 2" to 6" Clearance to combustibles around the pipe only, not the stove

at any time. Read instructions on the labels of the non single wall pipe.

(The black or non-painted connector pipe should be at least 28 ga. steel and a minimum of

eighteen inches (18.0") from a combustible wall and eighteen inches (18.0") from ceiling.

It is permissible to use single wall pipe and Class A pipe both if you follow your counties rules

and regulations with no single wall pipe penetrating any surface without 18" Clearance to

combustibles around it. It is recommended in this situation to convert to Double Wall or Class A

pipe at the ceiling box transition. 8 ft or more chimney is best. If you need more draft, add a

section of chimney pipe.

It is not permissible to connect this unit to a chimney that is servicing another unit.

Flue Size-The proper flue size is determined by measuring the inside diameter of the flue collar

on the unit. This stove is equipped with a four-inch (6") TOP EXHAUST FLUE COLLAR. Therefore,

the connector pipe should be six inches (6") and never less in diameter than the collar on the

stove. Different manufacturers of stove pipe have different parts to adapt to stoves and their

brand of stove pipe to accommodate 6" Pipe. This is necessary to accommodate pipe variation

from different manufacturers and maintain a good seal. All Joints should be sealed and checked

for leaks.

ALL CHIMNEY PIPES AFTER BURNING AND INSTALLING SHOULD BE CLEANED AND INSPECTED

ON A REGULAR BASIS DEPENDING ON HOW MUCH YOU ARE BURNING.

It is the consumer's responsibility to ensure the chimney system is safe and in good operating

condition. The manufacturer will not be held responsible for an accident attributed to a unit

connected to a faulty chimney system. This stove is considered a recreational stove and

carries no warranty except for shipping damage, which must be reported with 5 days of

receiving shipment to ensure replacement or repair from a warranty claim through the

shipping company.

*IMPROPER INSTALLATION:

The manufacturer will not be held responsible for damage caused by the

malfunction of a stove due to improper installation, CHIMNEY FIRES OR OVER-FIRING THE STOVE. Do not

use makeshift methods or material which may compromise the installation. 509 STOVES will not be

liable for consequential or indirect damages to property or persons resulting from the use of this

product. Consult a professional installer if you have any questions.