510 DESIGN Saxony 5DS153-0017 Montageanleitung

Blättern Sie online oder laden Sie pdf Montageanleitung für Heimbeleuchtung 510 DESIGN Saxony 5DS153-0017 herunter. 510 DESIGN Saxony 5DS153-0017 2 Seiten. Table lamp

Seite drucken

Important Safety Instructions:

•

For safety purpose, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does

not fit securely into your outlet, do not force it, contact a professional electrician. Never alter the plug in any way.

•

These instructions are provided for your safety. It is very important that they are read carefully and completely

before assembling fixture.

•

This fixture has been rated for up to (1) 60-watt maximum TYPE A bulb or (1) 13-watt compact fluorescent

light bulb. To avoid the risk of fire, do not exceed the recommended wattage.

Pre-assembly:



Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or

hardware.



Remove all parts and hardware from box along with any plastic protective packaging.

Parts Enclosed:

Warning:



Wires and cables are all attached (further wiring is not needed from consumer). When unpacking product, be

careful to not pull wires as it may result as a bad connection. Do not plug into electrical outlet until lamp is fully

assembled.

Note:

Turn the power off (unplug from the wall outlet) before replacing the bulb. Make sure the bulb has sufficient time to cool

down.

Saxony Table Lamp (Item#: 5DS153-0017)

ASSEMBLY INSTRUCTIONS

Page 1 of 2