Benedini TBS Mini Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch für Aufnahmegeräte Benedini TBS Mini herunter. Benedini TBS Mini 11 Seiten. Digital multifunctional rc-soundunit
Auch für Benedini TBS Mini: Handbuch Technische Daten (11 seiten), Handbuch (11 seiten)
Seite drucken
3. Control modes
3.1. Controlling the soundunit by the 12-positon "encoder" (12-Key coder)
The most comfortable way of controlling the sound unit is using the socalled "12-position encoder".
It consists of a 12 position rotary switch in combination with a push button. The desired sound is
selected by the rotary switch and is triggered by the pushbutton.
The encoder is mounted in your transmitter and connected at a spare proportional channel.
It is optional and must be ordered separately!
After installation you should test the encoder by a common servo at the according receiver channel.
Keep the encoder push button pressed and move the rotary switch through all positions. The
attached servo must move to a new position at each rotary switch position. The total movement of
the servo should be about the same as at a normal joystick channels set to 100% travel.
Rotary switch for
sound selection
trigger switch
The installation of the encoder in your transmitter is on your own risk
Proper functionality is not guaranteed at ALL transmitter brands / types
TBS Mini
Connect to spare
prop. Channel of
your TX.
The total resistance of the encoder can be
adjusted to your TX by two solder bridges at the
rear side of the encoder pcb:
BOTH bridges
open
closed
www.benedini.de
Total resistance
app. 22 KOhm
app. 5 KOhm
Page 5 of 11