Benedini TBS Mini Handbuch Technische Daten - Seite 8
Blättern Sie online oder laden Sie pdf Handbuch Technische Daten für Kontrolleinheit Benedini TBS Mini herunter. Benedini TBS Mini 11 Seiten. Digital multifunctional rc-soundunit
Auch für Benedini TBS Mini: Handbuch (11 seiten), Handbuch (11 seiten)
Seite drucken
3.3. Indirect Sound Selection mode - "2-Key Coder"
This mode can utilise a 3pos switch as an 'encoder' so that you can select ANY of the Additional
Sound Files to play.
The 3pos switch RX channel must be connected to Prop3 input of the TBS Mini. The mode set for
Prop3 in the TBS Mini must be set to "1
Selecting a Sound:
The desired sound (eg sound #3) is selected by toggling the switch 3 times from its center position
in one direction. This tells it to select Sound File #3. Now the selected sound is triggered by pushing
the switch to the other direction. The last selected sound can be triggered multiple times, without
new selection.
3.3.1. Teaching the sound unit for "2-Key Coder" control
'Teaching' of this mode is only to set the throttle trigger positions.
1) Power on the transmitter and receiver. The sound unit LED blinks fast = normal mode.
Bring all joysticks to neutral position and the throttle stick to minimum.
2) Press the LEARN button until one beep occurs = the LED is continuously lit.
At this step all neutral / idle positions are stored.
3) Move the throttle stick to your desired acceleration point (the position where you want the
engine idle sound to change to the moving sound) and flick the 3way switch UP.
A short sequence of the acceleration sound file is played.
4) Move throttle stick to full throttle and flick the 3way switch UP again.
A short sequence of the full speed sound file is played.
TBS Mini
st
Coder 2 Key" by using the TBS Flash software.
1: Selection of sound / action (1-12)
2: Triggering of selected sound / action
www.benedini.de
Page 8 of 11