Dymo Rhino 3000 Industrial Label Printer Gebrauchsanweisung - Seite 11
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Etikettenhersteller Dymo Rhino 3000 Industrial Label Printer herunter. Dymo Rhino 3000 Industrial Label Printer 17 Seiten. Dymo corporation instruction manual printer rhinopro 3000
Auch für Dymo Rhino 3000 Industrial Label Printer: Handbuch zur Auswahl (2 seiten)
Seite drucken
Printing Options
You can choose to print multiple copies of the same
label, print serialized labels, or print a combination
of both.
Printing Multiple Copies
You can print up to 50 copies of the same label at
one time. When printing multiple copies, a dotted
cut-line is printed between each label.
To print multiple copies
1. Press +
.
2. Press the ; arrow to increase the number of
copies to print. The default is 2 copies.
3. Press the : arrow to decrease the number of
copies (maximum is 50).
4. Press
to begin printing.
You may notice a brief pause in printing
between each label for more complex formats.
When printing is finished, the number of copies to
print returns to 2.
Serializing Your Labels
You can print serialized labels numerically or
alphabetically. Numbers can be incremented from
1-99 and letters from A-Z.
You can serialize any number or letter by placing
the cursor (|) behind the position to be
incremented, such as the number 2 in 12|3 or the
letter B in AB|C. For example, with the cursor
behind the 2 in 12|3 and the increment #=3, the
resulting labels would print as 123, 133, and 143.
123
Figure 12
133
143
When the letter Z or the number 9 is reached
during serialization, a letter or number is added to
increase the increment. For example, Z increments
to AA and 9 increments to 10.
When a space is present in a string to be
serialized, only the numbers or letters after the
space are serialized.
To serialize your labels
1. Enter the text for your label.
2. Use the arrow keys to move the cursor behind
the letter or number to serialize.
3. Press
.
SERIAL
4. Select the increment and press
Printing begins automatically.
Advancing the Label Tape
The default leader space for all labels is
approximately 7/16" (11.5 mm). To add additional
blank space to the beginning or end of your label,
you can feed the tape in 0.25" (6 mm) increments.
To feed the label tape
Press
+
.
♦
BOX/UL
Adjusting Print Quality (Advanced)
Depending on the label material you choose, you
may need to lighten or darken the print on the label.
Adjusting the print head temperature allows you to
control the print quality (
To set the print head temperature
1. Press +
.
VERT
2. Use the arrow keys to select the print head
temperature and press
3. Repeat as necessary until you are satisfied with
the print quality.
.
±
20).
.
11