Dymo RhinoPRO 1000 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Etikettenhersteller Dymo RhinoPRO 1000 herunter. Dymo RhinoPRO 1000 5 Seiten. Dymo rhino 1000: user guide
Auch für Dymo RhinoPRO 1000: Kurzreferenz (2 seiten), Gebrauchsanweisung (2 seiten), Benutzerhandbuch (11 seiten)

Seite drucken

• Press

cursor to the beginning or end of the text.

• When used in conjunction with certain function

keys, use

• To insert characters into the text, use

to position the cursor under the

character to the right of the insertion point,

then type in the characters required.

PRINTING

• Press

to print the label.

• Use cutter lever E

label – see page 2.

SPACE KEY

• Press

to insert a space into the text.

FEED

FEED KEY

FEED

• Press

blank tape

COPIES

SYMBOLS

SYM

• Press to select a symbol character – see

'Symbols and special characters' and the

symbols table on page 2.

TEXT SIZE

SIZE

• Press to display the six text print sizes:

half-height, condensed full height, condensed

half-height, normal

half-height, extended

The cursor will be positioned over the current

selection.

• Either press

to exit, or use

DEL

to move the cursor over the size symbol

required, then press

selection, or

and print the label.

VERTICAL TEXT

• Rotates the text through 90° so that the label is

printed

by the VERT indicator, top right of the display.

• Press again to cancel and return to horizontal

text.

Note: Vertical text is not available on two-lines.

2-LINE PRINTING

• Press

to start the second line of text on a

two-line label. The two lines will be printed

half-height and ranged left, e.g.

This is a two

will be printed as:

to move the

to select options.

to release and tab-cut the

to feed out 20mm of

full height, normal

full height, extended

to confirm the

SIZE

to confirm the selection

VERT

, as confirmed

line label in the display

This is a two

line label

BOXED/UNDERLINED PRINTING

A A

Normal

text

• Press

• Use

the desired option and press

(confirmed by the

• To exit this menu and return to normal text

press

ITALIC

• Press once to print the label in italic text

(confirmed by the ITALIC indicator in the

display).

Press again to cancel and return to normal

text.

OUTLINE

• Press shift followed by outline to print the

label in outline text (confirmed by the

OUTLINE indicator in the display).

Press shift and outline again to cancel and

return to normal text.

LABEL LENGTH

Displays the current label length. The length is

normally calculated automatically, according to

the length of the text on the label.

• Press

changing the length, or:

• use

max.) or decrease the length in 2mm steps.

The display will flash if you try to make the

label shorter than the text.

• If the length displayed is preceded by the

symbol, the length has already been fixed; the

label is too short for the text and it will not

print. Either press

in 2mm steps until the

or press

the label is now long enough for the text and

can be printed.

• Press

labels, confirmed by the LENGTH SET indicator in

the display, or

• press

label.

• Pressing

length and restore the automatic length.

Underlined Box

around

once to display the menu above.

to move the cursor under

indicator displayed.

DEL

OUTLINE

ITALIC

LENGTH

SIZE

to exit the length function without

DEL

to increase (up to 402mm

to increase the length

symbol disappears,

CLEAR

to cancel fixed length;

DEL

to fix the length for all subsequent

to fix the new length and print the

CLEAR

will cancel the fixed

DEL

Shaded box

around

to enter .