AirCom AB HVLP Series Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Farbspritzgerät AirCom AB HVLP Series herunter. AirCom AB HVLP Series 16 Seiten.

Seite drucken
AB HVLP series

TROUBLESHOOTING

Anomaly
No atomization
Leakage from the
nozzle
Air leakage from the
adjustment screw
Problem / Solution
No pressure is getting to the gun
Check air system
Gasket part. [G] worn out
Replace gasket part. [G] worn out
The head part. [1002-106], the nozzle part. [1002-
107] and the needle part. [1072] are worn out.
Replace the head part. [1002-106], the nozzle part.
[1002-107] and the needle part. [1072]
The product is exceeding the amount needed
Reduce the product passage
Lack of product (flow rate too low)
Add product or reduce atomization air
pressure
Missing product in tank or clogged pipes
Fill tank or clean up with solvent
Mounted handwheel part. [1007-42] worn out
Replace mounted handwheel part. [1007-42]
worn out
Needle part. [1072] / nozzle part. [1002-107] worn out
Replace needle part. [1072] / nozzle part. [1002-107]
worn out
Gasket part. [B]
Replace gasket part. [B]
aircom.it
EN
Instruction Manual - 9