5Core Pro series Betriebshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Verstärken 5Core Pro series herunter. 5Core Pro series 2 Seiten. 15” active amplifier (rechargeable)
Auch für 5Core Pro series: Betriebshandbuch (4 seiten)

Seite drucken

Page 2

Back Panel Controls & Features

• Provision for both AC and inbuilt DC 12V (Rechargeable) Battery Operation

ensures continuity of program.

• MIC-1 to MIC-2 are provided with individual Volume Control.

• BASS, TREBLE & Echo controls provided for shaping tonal quality of music

& speech as desired.

• MASTER control permits adjustment of overall volume of program inputs.

• Protection against wrong battery polarity-provided.

• Audio output & input provision

• Seperate tone control provided for volume/treble/bass/echo/mic/guitar.

• Seperate tone control provided for Mic Treble and Mic Bass.

• Inbuilt neodymium tweeter.

• Wireless hand microphone & head microphone

• Bluetooth module with recording feature.

1. VOLUME : Slide shortly to volume level+ & volume level-.

2. MODE : To select All Modes (AUX/

4. PREVIOUS : Press shortly to select the previous song in

mode.

5. PLAY/PAUSE : Press shortly to Play/Pause the song in

Press for 3 second to auto scanning in FM mode.

6. NEXT : Press shortly to select the next song in

Note: Due to continuous upgradation, specifications and features may

change without intimation of prior notice.

Speaker and Tweeter used in Amplifier

FR 15120

Frame: MS, 15"

Cone: Paper body with cotton edge

Impedance: 4

Max Power: 850PMPO

Magnet: 120X57X20

Voice Coil: 1.5" Voice coil with Aluminium heat sink

/MMC/Bluetooth).

/MMC

/MMC mode.

ND-T01

Neodymium magnet

Guideline to Operate the Amplifier

1. Place the Amplier in dry and well ventilated place. Considerable heat is

generated inside the amplier during continuous use, therefore do not block the

air ventilation holes of the active amplier.

2. Only good quality Low impedance microphones like 5 CORE 5CM-ND 780X, ND

99X or ND series to be used to avoid / reduce feedback & howling. This will help

obtaining satisfactory power output from Amplier without howling or feedback.

3. It is advised to keep the master Control of the Amplier at'0' position before

switching 'ON' the Amplier & later may be moved to optimum position say '6 to 8'.

Safety Instructions

• WATER AND MOISTURE: In order to prevent any re or shock hazard, do not

expose this equipment to rain or moisture.

• POWER SOURCE: The equipment should be connected to a 220-240V 50/60Hz.

• POWER CORD PROTECTION: Do not cut, damage or modify the power cord

supplied with the equipment, keep the power supply cord away from heaters and

harmful chemicals. Do not place heavy objects on the power cord.

• Operation on Generator: When operating the Amplier on a generator, make

sure it is switched 'OFF' till the generator voltage has stabilized and then only

switch the amplier 'ON'.

• VENTILATION: The amplier should be situated so that its location or position

does not interfere with its proper ventilation, Also do not insert or drop anything

into the ventilation holes.

• PREVENTION OF LOSS IN SPEAKER CABLES: Always use thick cables for low

impedance speakers connections, Use of cable type 23/38 or thicker is

recommended as heavy current ow through the cables.

• GROUNDING OR EARTHING: The equipment must be earthed properly before

operating it to avoid electric shock. A wire from the earth terminal must be

connected to either water pipe or to electrical earth for safe operation.

Page 3