Dymo LabelWriter 450 Turbo Schnellstart-Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Software Dymo LabelWriter 450 Turbo herunter. Dymo LabelWriter 450 Turbo 20 Seiten. How to order and insert a roll of labels in the dymo labelwriter
Auch für Dymo LabelWriter 450 Turbo: Schnellstart-Handbuch (14 seiten), Übersicht (2 seiten), Setup-Handbuch (11 seiten), Schnellstart-Handbuch (10 seiten), Benutzerhandbuch (19 seiten), Installationshandbuch (4 seiten), Gebrauchsanweisung (3 seiten)

Slide the spool guide onto the right side of the spool and press

the guide tightly against the side of the label roll, leaving no gap

between the roll and the spool. See Figure 6.

To ensure proper feeding of labels during printing, the

NOTE

label roll must fit snugly against both sides of the label spool,

with no gaps.

Insert the label spool into the slot in the printer cover with the

labels extending from underneath the roll. See Figure 7.

Align the left edge of the label with the left edge of the label feed

slot and insert the label into the slot. See Figure 8.

The printer automatically feeds the label, stopping at the

beginning of the first label.

If the printer does not feed the labels, make sure

the first label is fully inserted and then press the

form-feed button.

If the first label on the roll is not a full label, press

the form-feed button to eject the partial label.

Slide the label guide to the left until the label guide

aligns with the right edge of the label. See Figure 8.

Make sure that the label guide does not pinch

the label.

Carefully lower the top cover.

Align labels

against left edge

Figure 6

Figure 7

Slide label

guide against

labels

Figure 8