Dymo LabelWriter DUO Schnellstart-Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Software Dymo LabelWriter DUO herunter. Dymo LabelWriter DUO 8 Seiten. Dymo labelwriter printer quick start
Auch für Dymo LabelWriter DUO: Schnellstart-Handbuch (14 seiten), Schnellstart-Handbuch (12 seiten), Übersicht (2 seiten), Benutzerhandbuch (19 seiten), Schnellstart-Handbuch (6 seiten)
Seite drucken
To load the D1 tape cassette
1 Press the button on the front of the printer to open the
tape cassette tray.
2 Set the cassette switch for the size of the tape cassette
that you are inserting. See Figure 9. A notch in the
cassette fits over the switch when the cassette is in the
correct position.
NOTE The first time you use the printer, remove the
protective cardboard insert from between the print head and
pinch roller. See Figure 9.
3 Make sure the tape and ribbon are taut across the
mouth of the cassette and that the tape passes between the guideposts. If necessary, turn the
spool clockwise to tighten the ribbon.
4 Insert the cassette with the tape and ribbon positioned
between the print head and pinch roller. See Figure 10.
5 Press firmly until cassette clicks into place. Make sure tape
and ribbon are positioned correctly.
6 Press the button to close the tape cassette tray.
You are now ready to print your first label.
Set cassette
switch
Push down gently
7
= 6 mm
= 9/12 mm
= 19/24 mm
Remove cardboard insert
Figure 9
Print Head
Pinch Roller
Figure 10