Gadgetree 8045551 Betriebsanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Redner Gadgetree 8045551 herunter. Gadgetree 8045551 2 Seiten. Suction cup bluetooth speaker

Seite drucken

How to use:

Using your device for handsfree calls when in Bluetooth

• Use the < button on the side of the speaker (between the volume buttons) to answer a phone call (when in Bluetooth

call when finished

• Use the < button to redial the last call with a quick double press

• A single press on the + button will forward to the next track. A single press on the - button will switch to the previous track

• Hold the + button to increase the volume

• Hold the - button to decrease the volume

• Alternatively, you can use the volume control on your device to adjust the volume

• Use the mic situated on the side of the speaker during handsfree calls

Note: sound performance can be affected by transmitting distance, poor signal and other factors. see troubleshooting for more information.

LeD Indicator status:

LED light found on the base of the speaker.

Red LED on

Red LED off

Blue LED flashing quickly

Blue LED flashing slowly

troubLesHootINg:

1. Handsfree call functionality is only available when Bluetooth

2. Handsfree call functionality can be interrupted with interference from time to time, especially with high-frequency electromagnetism.

3. Some terminal audio players manage automatic switching between songs differently and you may experience some POP noise in the interval

between songs from time to time.

4. If you experience issues connecting the Bluetooth

search for the device and re-pair it.

5. Poor signal environments will affect sound playback performance. Moving the speaker to a better signal area will restore performance.

6. Low battery capacity may also affect playback performance. Recharge the device using the cable provided to restore performance.

7. Only the silicone housing is water resistant, allowing use of the speaker outdoors. Please note that the inner structure and components

are not waterproof.

system specIfIcatIoNs:

Power supply:

Output power:

Frequency:

Signal/noise ratio:

Impedance:

Li-ion output voltage:

Li-ion input voltage:

Lithium battery capacity:

Music play time:

Charging time:

Speaker unit:

mode:

Charging

Fully charged

Bluetooth

device is connected and paired.

device, please delete the Bluetooth

DC, 5V

3W (1kHz, THD10%)

200Hz-20kHz

≥85dB

4 Ohms (Ω)

3.7V-4.2V±0.05V

300mAh

Two hours at maximum volume

<2 hours

40mm

pairing

paired successfully

device from the list, reactivate the Bluetooth

mode) and then to hang up the

speaker,