Gadspot NC1000-W10 Erstmalige Einrichtung - Seite 2

Blättern Sie online oder laden Sie pdf Erstmalige Einrichtung für Sicherheitskamera Gadspot NC1000-W10 herunter. Gadspot NC1000-W10 5 Seiten. Wireless ip networking camera

Seite drucken
Initial Setup for Wireless IP Networking
Camera (NC1000-W10)
1. Please reset the camera to factory default by pressing the button in the hole to the left of the
lens. Make sure the power is on, and then hold the button for 10 seconds.
2. Once it has been reset, connect the camera to your computer using the cross-over (gray)
cable.
3. Make sure your computer is set to obtain an IP address automatically.
Right click on "My Network Places" on your desktop and choose "Properties".
Right click on "Local Area Connection" and choose "Properties".
Gadspot, Inc.
10505 Valley Blvd Suite#638
El Monte, CA 91731
Tel. 626-442-5588
Fax. 626-579-6666