HHO Plus CCPWM60A Installationshandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge HHO Plus CCPWM60A herunter. HHO Plus CCPWM60A 10 Seiten. Hho hydrogen on demand dual fuel generator systems
Auch für HHO Plus CCPWM60A: Installationshandbuch (11 seiten), Installationshandbuch (12 seiten), Installationshandbuch (10 seiten)
Seite drucken
Minimum Voltage
The CCPWM60A is designed for making the automatic power supply of the HHO System without the need for
The CCPWM60A is designed for making the automatic power supply of the HHO System without the need for
The CCPWM60A is designed for making the automatic power supply of the HHO System without the need for
relays or picking up the signal from the alternator/ignition key, making the system safer to use and easier to
relays or picking up the signal from the alternator/ignition key,
install. In general the new CCPWM60A will work based on the voltage of the car:
install. In general the new CCPWM60A will work based on the voltage of the car:
- Engine is stopped – voltage in caris
voltage in caris below 12,8V PWM =>is not working;
- Engine is working – voltage in caris
voltage in caris above 13VPWM =>is working.
IMPORTANT: After having selected your voltage working limits you should test it
After having selected your voltage working limits you should test it
After having selected your voltage working limits you should test it
to check if it works correctly in your car. Stop engine and check if the CCPWM
to check if it works correctly in your car. Stop engine and check if the CCPWM
to check if it works correctly in your car. Stop engine and check if the CCPWM
shuts down. Start engine and check if CCPWM turns ON.
shuts down. Start engine and check if CCPWM turns ON.
10 Water Level Sensor
Water Level Sensor
The water level should be placed in a way that, when the water
The water level should be placed in a way that, when the water
level is above the minimum value, the signal coming from the
level is above the minimum value, the signal coming from the
CCPWM does not return to the CCPWM. That is, the water level
circuit should operate as normally open (NO). Using our
circuit should operate as normally
company models, the water level sensor should be placed
the water level sensor should be placed up
(please check last picture on this manual).
(please check last picture on this manual).
If you are not using a water level sensor in your system, no
If you are not using a water level sensor in your system,
operation is required.
If the water level drops below the minimum level then the
vel drops below the minimum level then the
CCPWM will not work and a red light will appear
CCPWM will not work and a
CCPWM60A – Installation Manual
The CCPWM will only work when the real car voltage value is
The CCPWM will only work when the real car voltage value is
between the minimum and the maximum working voltage
between the minimum and the maximum working voltage
value.
The CCPWM60A will shut down completely if the voltage drops
The CCPWM60A will shut down completely if the voltage drops
below 12,8V. If the voltage in the car is lower than the value
below 12,8V. If the voltage in the car is lower than the value
selected then the CCPWM60A will stop working and an alarm
ected then the CCPWM60A will stop working and an alarm
will appear.
To set this value just proceed in the same way as explained for
To set this value just proceed in the same way as explained for
the setting the amperage.
PWM. That is, the water level
Installation Manual
making the system safer to use and easier to
9