5Gstore EZ-62B Setup-Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Schalter 5Gstore EZ-62B herunter. 5Gstore EZ-62B 15 Seiten. Single outlet remote power switch

Seite drucken

a. Outlet mode : Select between Auto Reset OR Manual Control

i. Auto Reset : The EZ-62B will Ping a specific address or the default

website addresses and when pings fail, power to the outlet will be

reset

ii. Manual Control : User must access the Mobile App or Cloud website to

manually reset or power outlet ON/OFF

b. Ping Delay : This is the time the EZ-62B will wait after a Reset, before it

starts the ping tests. This gives your equipment enough time to reboot.

Default is 0.

c. Power On Delay : This is the time the EZ-62B will take after a reset is

triggered, before the outlet is powered back on. Default is 3 seconds.

d. No. of Resets : This is the number of times the outlet will automatically

reset when a time out is detected. Configurable from 1x-10x or infinite ∞

i. Example with 5x : If connectivity is not restored after the 5

outlet will stop resetting after this 5

until the connection is restored. Default is 1x.

e. Reset Only : This setting disables the Turn OFF button. This is

recommended when plugging a modem or router into the outlet.

f. Ping Interval : Set interval after a successful ping to: 5, 15, 30 or 60

seconds. If connection times out, the ping interval is fixed at 5 seconds by

default.

3. Schedule : Set up to 6 schedules. If you

want the outlet to be turned OFF at one

time and ON at a later time, you must set 1

schedule to turn OFF and 1 schedule to turn

ON . Otherwise, use RESET

4. Ping Address

a. Ping Site : If desired, enter a

specific web address OR a local

device's IP address

b. Mode : Select between Ping or

HTTP. Default is Ping

5. Time

a. Time Zone : Select your zone

b. DST : Enable or Disable

c. Time : Shows current time

attempt. The EZ-62B will sit idly

reset, the