Gage Bilt GB574 Original-Bedienungsanleitung - Seite 4
Blättern Sie online oder laden Sie pdf Original-Bedienungsanleitung für Werkzeuge Gage Bilt GB574 herunter. Gage Bilt GB574 16 Seiten. Installation tool
Seite drucken
WARNING:
Any other use is forbidden.
The GB574 and the GB574(A) are hydraulic installation tools designed specifically for the efficient installation of HUCKRIMP® (krimpnuts)
with a crimping action that deforms the nut to provide accurate installation loads. They weigh just over 3 lbs. (1.36kg) and can be operated
in any position. They have up to a .300" (7.6 mm) fastener setting stroke and a rated pull load of 12,428 lbs. (55.3 kN).
The GB574 installation tool operates on hydraulic pressure developed by a Powerunit set at 6,000 psi. (414.0 bar) maximum PULL
pressure. The tool comes equipped with a 12 feet (3.65 m) of hydraulic hose with quick disconnects and a electric control cord assembly.
The GB574(A) installation tool operates on hydraulic pressure developed by a Powerunit set at 6,000 psi. (414.0 bar) maximum PULL
pressure. The tool comes equipped with a 12 feet (3.65 m) of hydraulic hose with quick disconnects and an air line assembly.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection
chart on pg. 14).
WARNING:
Do not operate in an explosive atmosphere.
The GB574 & GB574(A) can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
GB574/GB574A Installation Tool
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Weight
Hyd. Pressure Req'd.
Hyd. Power Source
Hydraulic Oil
Setting Stroke
Rated Pull Load
- 3 lbs. (1.36 kg)
- 6,000 psi (414.0 bar) MAX. PULL (Tool spring RETURN)
- GB910, GB912 or GB940
Powerunit or equivalent.
- See hydraulic pump instructions.
See powerunit for hydraulic oil specifications.
- up to .300" (7.6 mm)
- 12,428 lbs. (55.3 kN)
4
Rev. 6/22