Gage Bilt GB704 Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Werkzeuge Gage Bilt GB704 herunter. Gage Bilt GB704 14 Seiten. Installation tool
Auch für Gage Bilt GB704: Installationshandbuch (13 seiten), Original-Bedienungsanleitung (20 seiten)

Seite drucken
Gage Bilt GB704 Handbuch
HEAD
WARNING:
Dispose of hydraulic oil in accordance with applicable regulations.
Remove nose assembly from tool before attempting disassembly of head assy.
Remove end cap (704112). Push against threaded end of piston (704507) to slide it out of head cylinder assy (704183). Be careful not
to damage threads or cause burrs on polished piston (704507) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
S/N: 1090 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
401080 - BACK-UP RING
10
204304 - SWIVEL ASSEMBLY
403764 - O'RING
Rev. 11/14