Gage Bilt GB713SH Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Werkzeuge Gage Bilt GB713SH herunter. Gage Bilt GB713SH 14 Seiten.

HEAD

WARNING:

Dispose of Hydraulic Oil in accordance with applicable regulations.

Remove nose assembly from tool before attempting disassembly of head assy.

Remove end cap (713217). Push against threaded end of piston (713211) to slide it out of head cylinder assy (713123). Be careful not

to damage threads or cause burrs on polished piston (713211) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the

four socket-head cap screws (400061) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

204304 - SWIVEL ASSEMBLY

401080 - BACK-UP RING

403764 - O'RING

S/N: 1117 AND ABOVE

REV. 11/14

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.