Gage Bilt GB2581A Original-Bedienungsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Original-Bedienungsanleitung für Elektrowerkzeug Gage Bilt GB2581A herunter. Gage Bilt GB2581A 15 Seiten. Installation tool
Seite drucken
When the tool is connected to a powerunit, operation is controlled by an electric actuator in the handle. When the electric actuator is
depressed, a directional valve in the powerunit directs oil to the front side of the piston ass'y forcing it and the nose assembly collet
rearward. This action causes the jaws to clamp onto the fastener pintail and pull the sheets together. The anvil is forced forward,
swaging the collar into locking grooves of the fastener. Further force breaks the pintail off, approximately flush with the collar.
When the electric actuator is released the directional valve reverses oil flow to the back of the piston ass'y and pushes the nose as-
sembly off of the swaged fastener. The pintail will eject from deflector once next rivet is installed.
Piston Travel
Actuator
GB2581 S/N: 1068 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
PRINCIPLE OF OPERATION
HYDRAULIC DIAGRAM
PULL Pressure
RETURN Pressure
PULL Cycle
Image may not reflect actual tool
Actuator
Pressurized Oil
Return Oil
6
Piston Travel
PULL Pressure
RETURN Pressure
RETURN Cycle
Rev. 4/17