Hi Sharp HS-CC756W Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera Hi Sharp HS-CC756W herunter. Hi Sharp HS-CC756W 5 Seiten. Hi sharp hs-cc756w 1/3 wide dymanic range color ccd camera

Seite drucken

Features

1. 1/3" Sony Wide Dynamic image senor

2. Easy installation and special application

3. Support up to 8 privacy zone setting

4. Remote controllable for easy setting

5. Built-In ICR cut filter for DAY & Night

6. 3X digital zoom for high quality picture

7. Advanced Day & Night mode with built-in Sony DSP chip for necessary

light level compensation.

8. Standard high quality audio

9. Power selection at AC100-240V or DC12V/AC24V

10. Offer image rotate function in both Horizontal and vertical.

11. Selectable picture display in normal and negative mode

12. 530 lines of high horizontal resolution

13. Minimum subject illumination of 0.003 lux @ F1.2

14. Automatic / Manual electronic shutter function 1/60 ~ 1/50,000 Seconds.

15. Digital slow shutter function available for special application.

IRDA Remote Controller

Left/Right Button: Move horizontally

to and between menu and functions

OK Button: Press to access Main Menu

or press to enter a sub-menu option

UP/DOWN Button: Move vertically to

and between menu and functions

Note: Other's buttons of controller are reserve for future features/functions.

Parts & Functions

1. Menu Selection Button:

* MENU button Confirm button

*UP/DOWN button Users are able to use Up/Down button select the

function that want to change from the menu list.

*LEFT/RIGHT button Users are able to use Left/Right button to change

each function's setting.

2. Lens type

Refer to lens type, users are able to choose best mode (DC, VIDEO or

AES) for their lens.

3. Remote Jack

Provided RS485 / RS422 connection interface

4. Irda receiving terminal

Users are able to use remote controller to adjust camera's setting.

5. BNC Image Output Jack

6. Power Indicator Light

7. High Quality Stereo Jack

8. Power Source

AC100V AC240V or DC12V/AC24V Input

Connection Interface RS485

RS485 Interface

1. Connection:

CAMERA

R+

R-

T+

T-

2. CAMERA and KEYBOARD PELCO P Connection: KEYBOARD ID must be

CAMERA ID+1

3. If Users changed the CAMERA ID from OSD MENU, users have to shut

down (exit) OSD menu once in order to make New CAMERA ID actives.

Keyboard(RS485)

Enter 95; Press the

Enter Main Menu

PRESET key until the

main menu display on

the screen.

Press OPEN Key

Enter Main Menu / Enter Sub Menu

Press CLOSE Key

Exit Sub Menu / Enter Sub Menu

Press NEAR Key

Cursor Up

Press FAR Key

Cursor Down

Press IN Key

setting value decrease (-) at Sub Menu

Press OUT Key

setting value increase (+) at Sub Menu

Joystick Left

setting value decrease (-) at Sub Menu

Joystick Right

setting value increase (+) at Sub Menu

Joystick Up

Cursor Up

Joystick Down

Cursor Down

Keyboard(RS485)

Camera

Press OPEN Key

Brightness +

Press CLOSE Key

Brightness -

Press IN Key

D-ZOOM IN (when WDR OFF)

Press OUT Key

D-ZOOM OUT (when WDR OFF)

PELCO P/D

D+

D-

Camera

Remark

OSD Mode

Remark

Live Mode