Hi Sharp HS-CW8301 Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Sicherheitskamera Hi Sharp HS-CW8301 herunter. Hi Sharp HS-CW8301 3 Seiten.

Seite drucken

Power and video output JACK：

DC JACK is for the power in, it is necessary to use a constant

voltage adapter , F(BNC) JACK is for video input.

D C JACK

F( BNC) JACK VIDE O

DC 12 V Powe r In

Vid eo O utput

Set up：

１． Please set the detect area

in the center of lens range

PIR Detect Mode:

Set up: Press "SET" button on remote controller,

and then press number button "3".

The white light blink once after press "3"

Note: User needs to press "3" button after "SET"

In 5 seconds. Else, the setting is cancel

Detect range:

35°

Application:

Indoor / outdoor / long distance sensor

Eg. : Corridor / front door / back door / under the roof / stairs /

office / factory / in house

Motion detected Mode

Set up: Press "SET" button on remote controller,

and then press number button "4".

The white light blink once after press "4"

Note: User needs to press "3" button after "SET"

In 5 seconds. Else, the setting is cancel

Detect range:

58°

Application:

Indoor, Eg. : Stairs / office / factory / in house

Note: - - - - line means within PIR detect range.

Line means motion detect range.

N.G

0.9M

２．Set up detection mode:

Stairs Mode:

Set up: Press "SET" button on remote controller,

and then press number button "1".

The white light blink once after press "1"

Note: User needs to press "1" button after "SET"

In 5 seconds. Else, the setting is cancel

Detect range:

58°

Application:

Indoor / long distance / somewhere need sensitive sensor.

Eg. : Stairs / office / factory / in house

Surveillance Mode:

Set up: Press "SET" button on remote controller,

and then press number button "2".

The white light blink once after press "2"

Note: User needs to press "2" button after "SET"

In 5 seconds. Else, the setting is cancel

Detect range:

58°

Application:

Outdoor, somewhere need high accuracy sensor, within 3M distance

Eg. : Corridor / front door / back door / under the roof

IR & White light active

IR trigger

If camera located is a un-limit condition, IR active when Lux is lower than 13

IR closed when Lux is higher than 15.

White light trigger

According to the camera detection mode:

Mode1 : Stairs Mode

Mode2: Surveillance Mode

Mode3: PIR Detect Mode

Mode4: Motion Mode

PIR detect condition：

１． The temperate object is moving from outside come into detect range.

２． The temperate object such as "humans", "cats", "dogs", will be

detected. Moving car with high temperature will also be detected.

Motion conditions

1. Within camera lens range when Illumination dark or bright exchange

2. Within camera lens range when any moving object in 3M range includes

people / animals / vehicles / plants movement by the wind / raining, etc.

3. To avoid motion detection error, the motion system is set to be trigger

within 2.5M of an adult shape with minor movement, when motion is

between 2.5-5M, it needs bigger movement to trigger the detection.

White light duration time

In the night, white light is active if any moving object is under motion detect.

Duration time is 15 seconds; the duration will last 15 seconds for each

motion detection and will continue until the last motion is detected

0.9M