Gage Bilt GB722 Installationshandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Installationshandbuch für Nietwerkzeuge Gage Bilt GB722 herunter. Gage Bilt GB722 13 Seiten. Installation tool
Auch für Gage Bilt GB722: Original-Bedienungsanleitung (20 seiten), Original-Bedienungsanleitung (20 seiten)
Seite drucken
PRINCIPLE OF OPERATION
When the actuator lever assy is depressed, the pressurized air inside the tool is released allowing spring
pressure to move the valve spool assy causing the air to be redirected. The air is directed to the top of the air
piston assy, moving it in a downward direction. The air below the air piston assy is then directed through the
valve sleeve and exhausted out of the bottom of the tool. Simultaneously, the piston rod assy connected to
the air piston assy is also moving down, forcing hydraulic oil up and into the front side of the head cylinder
assy, causing the piston to move to the rear of the head cylinder assy. The internal components of the
attached nose assembly are also moving with the piston to start the fastener installation. When the fastener
installation is completed, the actuator lever assy is released. Air pressure is then built up inside of the handle
causing the valve spool assy to return to its original position and reversing the sequence directing air
pressure to the rear of the head cylinder assy, causing the piston to move to the forward position.
CYLINDER
HEAD
OIL
PRESSURE
AIR
PRESSURE
AIR
PISTON
S/N: 1753 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
HEAD
PISTON
PISTON
ROD
AIR
PRESSURE
VALVE
SPOOL
EXHAUST
Image may not reflect actual tool.
AIR
PRESSURE
AIR
PISTON
AIR
PRESSURE
4
AIR
PRESSURE
AIR
PRESSURE
PRESSURE
REV. 1/15
AIR