5th Wheel M2 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Scooter 5th Wheel M2 herunter. 5th Wheel M2 18 Seiten.
Auch für 5th Wheel M2: Montageanleitung Handbuch (19 seiten)

Seite drucken

9 About Charging

①Open the rubber plug.

Step 1. Open the rubber plug and insert the charger into the charging

port on the scooter.

Step 2. Insert another end of the charger into the power outlet.

Step 3. When charging, the red indicator on the charger will light up.

When the indicator turns green, it means that the scooter is now fully

charged.

10 About the Battery and Charger

M2 electric scooter is equipped with a special lithium battery and a special smart charger. The scooter

and its accessories have a special number. Do not use chargers of other brands, nor should other types

of products be charged with the charger of our company. The company will not be responsible for the

accessories damaged by misuse.

Battery

The lithium battery provided by the company can be recharged for at least 800times, and more than 1,000

times under normal circumstances. Please charge full battery for the ﬁrst time before using it. The battery

can be charged at anytime, and there is no any damage to charge it frequently. Meanwhile, please don' t

forget to charge it per 3 months if you don' t use it for along term.

②Plug in the charger.

③Insert the rubber

plug and ﬁx it after

charging.

Charger

The dedicated charger provided by the company has a function of charging protection .When the battery is

100% charged, the charger will be powered oﬀ automatically. The charging time is about 4-5 hours. Damage to

the battery arising from water, collision and other abnormal factors is excluded from the warranty policy.

Charging instructions

1. Open the rubber and insert the plug into the hole;

2. Insert another plug of the charger into the electric outlet;

3. When the indicator lamp is red, it shows the battery being charged; When the lamp turns green, the battery

is ﬁnished charging.

4. Please shut down and keep away from water before charging.

5. Only use the speciﬁed charger for charging.

Warning: Please be careful not to get electric shock.

Kinetic energy recovery

Press the brake in the running process to enable the kinetic energy recovery system and convert part of kinetic

energy into electrical energy to be stored and used. The kinetic energy recovery system can enhance the

experience of emergency braking. At the same time, the recovered kinetic energy can help increase the

endurance. Changes in the power are displayed simultaneously.